Installation Guide

22 23
TROUBLESHOOTING
Range Hood does
not turn on
A. Make sure that range hood is plugged
into powered outlet. Test outlet with other de-
vice if not working.
B. Remove baffle filters, reach inside behind
the control panel and locate the wire with
clip. Make sure control panel is securely
plugged in.
C. Check the plastic clip connection coming
out of the motor housing to make sure it's in-
tact.
My range hood is noisy
A. Check inside the range hood for any
loose debris and remove.
If your range hood is still noisy after checking,
please call 1-888-784-3108.
My range hood has
poor performance
My range hood shakes
Light bulbs went out
A. The installation is not secure. Check
again and make sure the installation
hardware is securely mounted.
B. The fan is broken or not balanced.
Re-align or replace fan.
C. The motor is loose. Check and make
sure the motor is solidly mounted to the
unit.
D. Baffle filter is loose and is not installed
correctly. Read page 12 for installation
instructions.
A. The range hood and cooktop are too
far away from each other.
Optimal distance is 24" to 36"
B. There are too many open windows or
doors in the area. Close some doors or
windows.
C. The motor performance has decreased
due to wear. Replace motor.
D. Check and make sure the tape holding
down the damper flaps at the vent hole
are removed before use.
E. The oil cup is full and needs to be
cleaned out.
F. The filters are clogged and need to be
cleaned.
A. Replace with a new LED lamp assembly.
B. Remove baffle filters, reach inside behind
the control panel and locate the wire with clip
behind the light housing. Make sure the light
is securely plugged in.
IF YOU HAVE TRIED ALL SOLUTIONS AND STILL EXPERIENCE
ISSUES, PLEASE CALL SUPPORT: 1-888-784-3108.
NOTES