Installation Guide
15
Securing the Oven to the Cabinet
1.) Fit oven into cabinet recess.
2.) Open the oven door.
3.) Secure the oven to the kitchen cabinet with two distance
holders “ A “, which fit holes in the oven frame and fit the two
screws, “ B “.
Ventilating Openings
Connection of the Oven
Ensure your appliance is properly installed and grounded by a qualified technician.
Ask your dealer to recommend a qualified technician or an authorized repair service.
This appliance is manufactured with a green GROUND wire connected to the oven
chassis.
After making sure that the power has been turned off, connect the flexible conduit
from the oven to the junction box using a UL Listed conduit connector. Figure 1 and
Figure 2 (See Page 15) and the following instructions provided below present the
most common way for connecting the oven.
Your local codes and ordinances take precedence over these instructions. Complete
electrical connections according to local codes and ordinances “WARNING” Risk of
Electric Shock, frame grounded to neutral of appliance through a link.
Grounding through the neutral conductor is prohibited for: new branch-circuit instal-
lations (1996 NEC), mobile homes and recreational vehicles or in an area where lo-
cal codes prohibit grounding through the neutral conductor.
For installations where grounding through the neutral conductor is prohibited:
• Disconnect the ground from the neutral at free end of conduit
• Use grounding terminal or lead to ground unit
• Connect neutral terminal or lead to branch circuit neutral in usual manner.
9HQWLODWLQJRSHQLQJV
INSTALLATION