Installation Guide

CAUTION: HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR

PROTECTIVE GLOVES WHENEVER IT IS NECESSARY TO REMOVE

PARTS FOR INSTALLING, CLEANING OR SERVICING.

A 47.75" x 2" x 4" wooden support (sold separately) is

required to properly install this Range Hood.

Install Wood Support

1. Locate at least two vertical studs at the wood mounting location by tapping drywall or by using a stud finder.

2. Position the supplied wood support

” ( mm) below the cabinet and drill 1/8” (3.175 mm) pilot holes through

the support, drywall and into the studs.

3. Secure the wood support to two or more vertical studs with wood screws (not provided).

4. Use threaded drywall anchors when mounting the hood onto sheet rock. Mounting the hood into wall studs or

lumbars is highly recommended.

0.5”

(12.7mm)

Wood Support