Installation Guide

1. Lift the range hood and place over the protruding mounting screws; the keyhole slots on the top of the range
hood should engage with the protruding mounting screws.
2. Gently slide the range hood backwards until it cannot
slide back any further. Finish screwing in the mounting screws.
11
Install Range Hood Mounting Screws
1. Mark the screw holes onto the bottom of cabinet by
measuring the holes located on top of the unit.
Remember to compensate for the size of the
wooden support frame.
You will need to cut the holes for the power cord and the damper hole under the cabinet.
3.Install the range hood mounting screws, leaving the
screws protruding a 1/4” (6.3 mm) to allow
clearance for mounting the range hood.
17.5mm
17.5mm
17.5mm
Top View
Keyhole Locations
0.69 in.
0.69 in.
0.69 in.
0.69 in.
2-1/8 in.
2-1/8 in.
2-1/8 in.
7.09 in.
7.09 in.
47.9 in.
2.41 in.
2.75 in.
2.75 in.
3.61 in.
19.82 in.
19.82 in.7.44 in.
8.27 in.