Installation Guide

INSTALLATIO N PROCEDURES
INSTALLING THE EXHAUST DUCTING
Important:
1.
Remove the packaging tape on the damper (located at the top of the unit) and make sure the flaps are
able to move freely.
2.
Use HVAC foil tape to wrap all the duct joints for an airtight seal
Important:
•
To provide extra support and to reduce the vibration, the appliance must fix onto the concrete wall
Important:

Install ductwork, making connection in direction of airflow as illustrated.

Secure joints in ductwork with sheet metal screws.

Wrap all duct joints with HVAC foil tape for an airtight seal.
Install Damper
1.
Position the damper over the damper adapter and secure using the screws provided.
f WALL
f DAMPER
f DAMPER ADAPTER
13