Installation Guide

CAUTION: NEVER PUT YOUR HAND INSIDE OF THE UNIT WHILE ITS OPERATING. FOR

THE BEST PERFORMANCE CLEAN YOUR

RANGE HOOD REGULARLY.

CLEANING

1. Clean the Range Hood assembly once every 6 months.

2. DO NOT clean the motor or electrical components with water or

any other liquid

REPLACING LIGHT BULBS

CAUTION: LAMP UNIT MAY BE HOT! WAIT UNTIL THE UNIT IS COOL. BEFORE

ATTEMPTING TO REPLACE THE LED LAMPS MAKE SURE THE UNIT IS POWERED OFF AND

UNPLUGGED.

Note: Individual LED bulbs cannot be replaced, only entire LED lamps.

1. Remove the baffle filters

2. Find the wire connection of the lamp inside the unit and unplug.

3. Remove old LED lamp by pushing it out of its hole from the inside.

4. Plug in new LED lamp.

5. Reinstall the baffle filters.

MAINTENANCE