INSPIRING THE WORLD’S KITCHEN OVER THE RANGE MICROWAVE COS-2413ORM1SS IMPORTANT SAFETY INSTRUCTIONS Carefully read the following Important information regarding installation safety and maintenance. Keep these instruction for future reference.
THANK YOU FOR YOUR PURCHASE Thank you for your purchase. We know that you have many brands and products to choose from and we are honored to know that you have decided to take one of our products into your home and hope that you enjoy it. General information Important Safety Instructions .................................. 3 Electrical Requirements .......................................... 3 Damage – Shipment/Installation.............................. 4 Parts Included.......................................
Installation Instructions Installation Instructions IMPORTANT SAFETY INSTRUCTIONS This product requires a three-prong grounded outlet. The installer must perform a ground continuity check on the power outlet box before beginning the installation to ensure that the outlet box is properly grounded. If not properly grounded, or if the outlet box does not meet electrical requirements noted (under ELECTRICAL REQUIREMENTS), a qualified electrician should be employed to correct any deficiencies.
Installation Instructions Installation Instructions 1 PLACEMENT OF THE MOUNTING PLATE TOOLS YOU WILL NEED Pencil # 1 Phillips screwdriver Tin snips (for cutting damper, if required) Ruler or tape measure and straight edge A. REMOVING THE MICROWAVE OVEN FROM THE CARTON/ REMOVING THE MOUNTING PLATE Carpenter square (optional) Screws Screws Mounting Plate 1 Remove the installation instructions,use and care, exhaust adapter, turntable ring, shelf, filters, glass tray and the small hardware bag.
Installation Instructions Installation Instructions C. DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET Plate position-beneath flat bottom cabinet NOTE: IT IS VERY READ IMPORTANT AND FOLLOW IN THE TO THE DIRECTIONS INSTALLATION BEFORE PROCEEDINGINSTRUCTIONS REAR WALL TEMPLATE.WITH THIS This Rear mounting Wall Template serves plate and outlet. to position to locate the horizontal the bottom 1. Use a level exhaust accurately. to check that the template 2.
Installation Instructions 2 INSTALLATION TYPES This microwave oven is designed for adaptation to the following three types of ventilation: A. Outside Top Exhaust (Vertical Duct) B. Outside Back Exhaust (Horizontal Duct) C. Recirculating (Non-Vented Ductless) A OUTSIDE TOP EXHAUST (VERTICAL DUCT) Installation Instructions INSTALLATION INSTRUCTIONS FOR EXTERNAL EXHAUST DUCTING (Choose A, B or C) NOTE: This microwave is shipped assembled for Recirculating.
Installation Instructions Installation Instructions EXTERNAL EXHAUST DUCTING A OUTSIDE TOP EXHAUST (Vertical Duct) OUTSIDE TOP EXHAUST (EXAMPLE ONLY) INSTALLATION OVERVIEW The following chart describes an example of one possible ductwork installation. DUCT PIECES Roof Cap EQUIVALENT LENGTH 24 Ft. (7.3 m) x NUMBER USED = EQUIVALENT LENGTH x (1) = 24 Ft. (7.3 m) A1. Attach Mounting Plate to Wall A2. Prepare Top Cabinet A3. Adapting Microwave Blower for Outside Top Exhaust A4.
A2. USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET 2 Carefully pull out the blower unit. The wires will extend far enough to allow you to adjust the blower unit. A3. End B You need to drill holes for the top support screws, a hole large enough for the power cord to fit through, and a cutout large enough for the exhaust adaptor. ADAPTING MICROWAVE BLOWER FOR OUTSIDE TOP EXHAUST 5 Secure blower unit to microwave with the screw removed in Step 1. Make sure the screw is tight.
A5. MOUNT THE MICROWAVE OVEN (cont.) A6. ADJUST THE EXHAUST ADAPTOR Open the top cabinet and adjust the exhaust adaptor to connect to the house duct. Cabinet Front Cabinet Bottom Shelf Filler Block Blower Plate Back of Microwave Damper Equivalent to Depth of Cabinet Recess 4 Attach the microwave oven to the top cabinet. 5 Insert 2 self-aligning screws through outer top cabinet holes. Turn two full turns on each screw. B1. Prepare Rear Wall B2. Remove Blower Plate B3.
B3. ATTACH THE MOUNTING PLATE TO THE WALL B5. ADAPTING MICROWAVE BLOWER FOR OUTSIDE BACK EXHAUST (cont.) 8 Place the blower unit back into the opening. AFTER: Fan Blade Openings Facing Back End A 4 Rotate blower unit counterclockwise 180°. Before Rotation After Rotation End B • Read the instructions on the TOP CABINET CAUTION: Do not pull or stretch the blower unit wiring. Make sure the wires are not pinched, and that they are properly secured. TEMPLATE.
B6. MOUNT THE MICROWAVE OVEN C RECIRCULATING Cabinet Front (Non-Vented Ductless) Cabinet Bottom Shelf Filler Block INSTALLATION OVERVIEW Equivalent to Depth of Cabinet Recess Self-Aligning Screw C1. Attach Mounting Plate to Wall C2. Prepare Top Cabinet C3. Check Blower Plate C4. Mount the Microwave Oven C5. Install or change Charcoal Filter 3/8" TO EDGE serves to position the bottom This Rear Wall Template the horizontal exhaust mounting plate and to locate outlet.
C2. USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET C4. MOUNT THE MICROWAVE OVEN C4. MOUNT THE MICROWAVE OVEN (cont.) You need to drill holes for the top support screws and a hole large enough for the power cord to fit through. 2 Open the microwave door and remove the two vent mounting screws l; ocated on top of the microwave using a #1 Phillips screwdriver. 5 Insert 2 self-aligning screws through outer top cabinet holes. Turn two full turns on each screw.
5 Press the bottom of charcoal filter to place it into the correct position. BEFORE YOU USE YOUR MICROWAVE 1. Make sure the microwave oven has been installed according to instructions. Replace house fuse or turn breaker back on. 5. ION LLAT INSTA UCTIONS R INST 6 Reinstall the vent by sliding the bottom of the vent into place. Push the vent top into position and slide right into place. Replace the two vent mounting screws located on top of the microwave using a #1 Phillips screwdriver. 6. 2.
10-23/64 10-23/64 NOT E: IT IS VERY IMPORTA READ AND NTTO IN THE FOLLOW THE DIRECTION I BEFORE NSTALLATION INSTRU S PROC CTIONS REAR WAL EEDING WITH L TEMPLA THIS This TE. R ear mounti ng Wal l Temp l at e out l et. pl at e and t o ser ves t o posi l ocate t he hori tio n the bottom 1. Use a l evel zontal exh to c heck aust accur t hat the 2. Loca ately . t emp lat e is t e and p ositi mar k at ri ght oned le ast I sid e of t he c entero ne s t ud on the t l eft o line .
IMPORTANT Do Not Return This Product To The Store If you have a problem with this product, please contact Cosmo Customer Support at +1(888)784-3108 DATED PROOF OF PURCHASE, MODEL #, AND SERIAL # REQUIRED FOR WARRANTY SERVICE WARRANTY AND SERVICE For full warranty details on this product please visit: http://www.cosmoappliances.com/warranty TO RECEIVE WARRANTY SERVICE, YOUR PRODUCT MUST BE REGISTERED.
Cosmo is constantly making efforts to improve the quality and performance of our products, so we may make changes to our appliances without updating this manual. Electronic version of this manual is available at: www.cosmoappliances.