Use and Care Manual

14 15
12
SABBATH MODE
The Sabbath function is designed for those whose religious observances
require that certain features and modes are disabled. The range is factory
preset with Sabbath Mode Off.
To Turn On/Off Sabbath mode:
1. Make sure the oven is turned Off, and the meat probe is not plugged in.
NOTE: Sabbath mode cannot be set when the oven is On. The oven will
not recognize the meat probe while in Sabbath mode.
2. Press SETTINGS > Press START > Press 7, and then press 1 to (toggle
between ON / OFF).
3. Press SETTINGS again to enable Sabbath mode. The only cooking function
that works while the oven is set to Sabbath mode is Bake.
To Bake While the Oven is in Sabbath Mode:
1. Press BAKE.
2. Enter the desired oven temperature by pressing the numbered keypad.
3.
After selecting Bake and a Temperature, you have the option to set a Cook Time
and Start Time before pressing START. See “Cook Time” and “Start Time."
4.
Press START. Pressing Start activates Sabbath mode.
Only the Cancel control is functional.
•
Press CANCEL to exit Sabbath mode. Press SETTINGS again to turn off
Sabbath mode and resume normal oven operation. The display will
return to the time-of-day.
NOTE: If there is a power failure while the oven is in Sabbath mode, the oven will
resume in Sabbath mode when power is restored.
OVEN AUTO-OFF FEATURE
•
The oven can be programmed to turn off automatically either 12 or 24 hours
after the oven turns on.
•
The oven control is factory preset to automatically turn off the oven 12
hours after the oven turns on.
To change the Auto-off feature from 12 hours to 24 hours:
1. Press SETTINGS.
2. Press “5” on the number keypad. “12/24 hour” and “12” will appear
in the display.
3. Press “1” on the number keypad to turn the 12 to 24hour.
4. Press SETTINGS to confirm. The Auto-off feature has been changed to 24 hours.
NOTE: If you want to change the Auto-off feature back to 12 hours,
press SETTINGS, and then follow the display prompts.
Control Panel
13
DEMONSTRATION MODE
The demonstration mode is intended for sales floor demonstrations. It should
be Off for normal operation. While demonstration mode is active, the oven
will not heat.
To Turn Off Demonstration Mode:
1. Press SETTINGS. Options will appear in the display. Press 9 in the number
keypad, and “Demo Mode” and “ON. PRESS 1 :ON/ OFF” will appear
in the display.
2. Press 1 in the number keypad to change the Demonstration Mode setting to Off.
3. Press SETTINGS. The Demonstration Mode setting has been changed.
4. Press SETTINGS, and then follow the display prompts to return
the Demonstration Mode setting to On.
CONTROL LOCK
The control panel can be locked to avoid unintended use of the oven.
NOTES:
•
The control cannot be locked if the oven is in the SETTINGS menu.
•
The current time of day will remain in the display when the control is locked.
To Lock Control:
1. Make sure the oven(s) is not in use and Kitchen Timer is not running.
2. Press and hold START for 3 seconds or until “LOCKED” appears in the
display. “LOCKED” will remain lit in the display.
To Unlock Control:
1. Press and hold START for 3 seconds or until “LOCKED” scrolls in the display.
The ceramic cooking area will glow red when a heating element is on. Some parts
of the cooktop may not glow red when an element is on. This is normal. The
cooking area cycles off and on, even when set to HI , to keep the cooktop glass
from overheating. It is normal for the surface of ceramic glass to appear to
change color when surface cooking areas are hot. As the glass cools, it will return
to its original color.
IMPORTANT: To avoid permanent damage from pitting or scratching and to
condition to the cooktop surface, clean the cooktop after each use. Ceramic glass
cooktop cleaner and a cooktop scraper are also recommended for stubborn soils.
Do not use abrasive cleaners, cleaning pads or harsh chemicals for cleaning. All of
the items needed to clean and condition your ceramic glass cooktop are available
at most grocery stores. See the “Range Care” section for additional information.
•
Make sure the bottoms of pots and pans are clean and dry before using
them. Residue and water can leave deposits when heated.
•
Avoid storing jars or cans above the cooktop. Dropping a heavy or hard
object onto the cooktop could crack the cooktop.
Cooktop Use
Control Panel