Manualshelf

Full Product Manual

ManualsBrandsCosmo ManualsAppliances36 in. 380 CFM Ducted Insert Range Hood in Stainless Steel with Push Button Controls LED Lights and Permanent Filters
11121314151617181920
Range Hood Cabinet Cutout
Roof Venting Wall Venting
6ΒΌ"
(15.9 cm)
Cutout
Centerline
Centerline
Cutout
10.83 in
(27.5 cm)
36" Model: 34.65 in (88.0 cm)
30" Model: 26.75 in (67.9 cm)
2. Measure and mark lines for the cutout area as shown.
3. Drill a hole at each corner within the cutout area, and use a saber saw or
keyhole saw to cut an opening through the underside of the cabinet.
4. Complete cabinet preparation following the instructions for your type of
installation.
cabinet.
1. Determine and clearly mark the centerlines on the underside of the
Venting Outside Through the Roof/Wall
Assemble the duct that you will use over the duct opening. Do not attach
the duct at this time. Depending on your duct system, measure and mark
the cabinet cutout accordingly. Use a saber saw or keyhole saw to cut a
round opening through the top of the cabinet and the roof for the roof
vent or the back of the cabinet and the exterior wall for the wall vent.
18