Installation Guide

STEP 3 - MAKE ELECTRICAL CONNECTION
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or electrical shock.
1. Slide range close to nal location.
2. Plug into a grounded 3 prong outlet.
STEP 4 - INSTALL RANGE
IMPORTANT: If the range is moved to adjust the leveling legs, make sure when you
move the range back into its nal location that the anti-tip bracket is engaged by
repeating steps 1 through 8.
1. Slide range into nal location, making sure rear leveling leg slides into anti-tip
bracket. Leave a 1" (2.5 cm) gap between the back of the range and the back wall.
2. Place the outside of your foot against the bottom front to keep the range from
moving, and then grasp the back of the range, as shown.
25