Installation Guide

ELECTRICAL CONNECTION

IMPORTANT:

• Installation work and repairs should only be performed by a qualified

technician in accordance with all applicable codes and standards.

Repairs and service by unqualified persons could be dangerous and the

manufacturer will not be held responsible.

• Before connecting the appliance to the power supply, make sure that the

voltage and frequency listed on the rating label correspond with the

household electrical supply. This data must correspond to prevent

appliance damage. Consult an electrician if in doubt.

• The oven must connect to a sing

le-phase (split-phase), 3-wire or 4-wire,

120/208 VAC or 120/240 VAC, 60 hertz electrical system. This appliance

must be supplied with the proper voltage and frequency, and connected

to an individual (d

edicated to the appliance), properly grounded branch

circuit protected by a circuit breaker or time-delay fuse. It is the personal

responsibility of the oven owner to provide the correct electrical service

for this oven.

• Local codes and ordinances take precedence over these instructions.

mplete electrical connections according to local codes and ordinances.

WARNING

ELECTRICAL SHOCK HAZARD

• Remove house fuse or open circuit breaker to disconnect power before

servicing.

• This appliance must be properly grounded.

• Do not use an adapter or an extension cord.

• Failure to do so can result in death, fire, or electrical shock.