Installation Guide

To Check Bake Heating Element:

To Check Broil Heating Element:

4. Press START/OK to skip cook time setting and start the oven.

• After a couple minutes when the oven temperature reaches above

100°F, the temperature on the display will begin to rise and show the

current oven temperature. Confirm that display shows temperature

increasing.

5. Allow Bake mode to continue until oven has preheated to 175°F.

• Confirm that preheat signals when temperature is reached.

• Open the oven door temporarily. Without touching the oven bottom,

confirm that heat can be felt radiating from the oven bottom and

close the oven door.

6. Press CANCEL/OFF to stop Bake mode.

1. Keep the oven door closed. The oven heating elements will turn off when

oven door is open.

or repeatedly to select Bake mode, and press START/OK.2. Press

3. Press/Hold to adjust bake temperature setting to 175°F while it is

flashing, and press START/OK.

1. Keep the oven door closed. The oven heating elements will turn off when

oven door is open.

2. Press or repeatedly to select Broil mode, and press START/OK.

3. Press or to adjust broil setting to Hi or Lo while it is flashing, and

press START/OK to start the oven.

• After several minutes, the upper broil heating element can be visually

seen to start glowing red.

4. Press CANCEL/OFF to stop Broil mode.