Installation Guide

WARNING

• This appliance is intended for normal residential use. It is not approved

for commercial use, outdoor installation, or any other application not

specifically allowed by this manual.

• This appliance requires connection to a 3-prong or 4-prong, 240VAC

single-phase (split-phase), 60Hz grounded electrical source dedicated

to the appliance. When installed, appliance must be electrically

grounded in accordance with local codes or, in the absence of local

codes, with the National Electrical Code, NFPA 70 or the Canadian

Electric Code, CSA C22.1-02.

• Proper installation is the responsibility of the installer. Any adjustment

and service should be performed only by qualified range installers or

service technicians. The manufacturer is not responsible for any injury or

damage that may result from incorrect or defective installation by

unauthorized personnel.

• Product failure due to improper installation is not covered under

warranty.