Use and Care Manual

DISPLAYING SYSTEM FIRMWARE VERSION

repeatedly to select "UEr" in the display.

3. Press START/OK.

4. Press START/OK when finish.

1. Press SETTINGS.

2. Press or

SETTING OVEN TEMPERATURE CALIBRATION

repeatedly to select "CAL" in the display.

3. Press START/OK.

4. to adjust the offset temperature between -30°F

and +30°F (-17°C and +17°C).

• +30°F (+17°C) will raise the oven temperature and cook food more.

• -30°F (-17°C) will reduce the oven temperature and cook food less.

5. Press START/OK to confirm.

1. Press SETTINGS.

2. Press or

Press/Hold or

NOTE:

• This oven may cook differently than the one it replaced. Use the oven

for a few weeks to become more familiar with it before adjusting the

thermostat settings.

• This adjustment will not affect the broiling temperatures.

• Do not use thermometers, such as those found in grocery stores, to

check the temperature setting of your oven. These thermometers may

vary 20–40 degrees.

• The adjustment will be retained in memory after a power failure.