Use and Care Manual

61
PROBLEM POSSIBLE CAUSE SOLUTION
"E" and a
number
appears in
display
System error
detected.
This is an error code. Press
CANCEL/OFF to clear the display
and stop the beeping. If necessary,
reset oven power at the circuit
breaker. If error code remains or
repeats, write down error code and
contact a qualified service provider
for repairs.
ERROR CODES
ERROR CODE DESCRIPTION
E0
Problem with the oven temperature sensor or its
connection.
E1
Problem with the oven temperature sensor or its
connection that is causing the oven temperature to exceed
a preset threshold.
E2
Problem with the oven temperature sensor receptacle on
PCB.
E3
Oven is not heating after a cooking mode has started for
15 minutes.
E5
Oven temperature has exceeded 649°F (343°C) preset
maximum threshold.
E6
Detection of oven temperature rise when no cooking mode
is started.
E9
E10 Problem with the chips on PCB.
E15
Temperature at the PCB has exceeded 185°F (85°C) preset
maximum threshold.
E17
Problem with the cooling fan, the hall sensor, or their
connections.
Problem with the clock if clock exists.