Installation Guide

13
ELECTRICAL REQUIREMENTS
WARNING
Electrical Shock Hazard
The electrical power to the oven branch circuit must be shut off while line
connections are being made.
Do not use an extension cord with this appliance.
Electrical ground is required on this appliance. The free end of the green
wire (the ground wire) must be connected to a suitable ground. This wire
must remain grounded to the oven.
If cold water pipe is interrupted by plastic, non-metallic gaskets, union
connections or other insulating materials, DO NOT use for grounding.
DO NOT ground to a gas pipe.
DO NOT have a fuse in the NEUTRAL or GROUNDING circuit. A fuse in the
NEUTRAL or GROUNDING circuit could result in an electrical shock.
Check with a qualified electrician if you are in doubt as to whether the
appliance is properly grounded.
Failure to do so could result in death or serious injury.
WARNING: Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified electrician or service
technician if you are in doubt as to whether the appliance is properly
grounded. Do no modify the power supply cord plug. If it will not fit the outlet,
have a proper outlet installed by a qualified electrician.
Electrical Ratings: AC 120 V / 240 V, 60 Hz, 14.2 A
Power Source: Single-Phase