Installation Guide

6
Backsplash with screws Anti-tip bracket with screws Anti-tip wall anchor hooks with
screws (F965 only)
Gas pressure regulator Gas pipe adapter with washers Power cord with strain relief
(Pre-installed for F965NF)
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the required tools and parts before starting installation. Read and
follow the instructions provided with any tools listed here.
Tools Needed
Parts Supplied
• Tape measure
• Flat-blade screwdriver
• Phillips screwdriver
• Level
• Drill
• Wrench or pliers
• Pipe wrench
• 15/16" (2.4 cm) combination
wrench
• 1/8" (3.2 mm) drill bit (for wood
floors)
• Pipe-joint compound resistant to
Propane gas
• Marker or pencil
• 3/16" (4.8 mm) carbide-tipped
masonry drill bit (for
concrete/ceramic floors)
• Noncorrosive leak-detection
solution
For Propane/Natural Gas
Conversions
• 1/2" (1.3 cm) combination wrench
• 1/4" (6 mm) nut drive
• 9/32" (7 mm) nut drive
• Masking tape