Use and Care Manual

INSTALLATION INSTRUCTIONS

ATTACHING THE COOKTOP

To prevent liquids from leaking accidentally into the underlying storage space,

the appliance is equipped with a special gasket. To apply this gasket:

1.) Lay out the protective sealing strips along the edges of the opening in the countertop

and carefully overlap the strip end.

2.) Insert the cooktop into the countertop opening.

3.) With a screwdriver, assemble brackets to the cooktop bottom with the screws

(See below diagram).

4.) Slide the hooks into position and secure them with the screws.

5.) Trim the part of the sealing strips which extend beyond the hotplate base.

CONNECTING GAS TO COOKTOP

Before installing the cooktop consider the location of the gas supply and routing the gas

line.

• This cooktop is designed to operate at a pressure of 4” of the water column on natural

gas or 10” of the water column on propane gas (LPG).

• This cooktop can be converted for use with Liquid Propane gas (LPG). When using this

cooktop with LPG gas, the conversion must be made by a qualified installer before

attempting to operate the cooktop with that gas. LP kit can be purchased from an

authorized Cosmo dealer or contact Cosmo Customer Service for further assistance.

Continued on next page