Installation Guide

the function key buttons. To stop the speed function press key B.
If Speed 3 is required，press key D and adjust ―＋‖. At Speed 3,
both key C
and key D indication lights will flash on each of the function key button.
To turn on the light press key E. To turn off the light press key E again.
n FUNCTION KEYS: (Fig.21, Fig.26)
A == Infrared Remote Control
B == Automatic Stop Timer —15minutes
C == Speed 1/―－‖Control
D == Speed 2/―＋‖Control
E == Ligh
By pressing key C or D individually, the speed for each key will be the same
as above table. At the same time the indication light will flash on
each of the function key buttons. To stop the speed function, press key
B. If using Remote Control just press the ―OFF‖ button. If Speed 3 is
required，press key D and adjust―＋‖. At Speed 3 program both key C and
key D indication light will flash on each function key button. If Speed 4
function is available, and when Speed 4 function is ON, key C and D
indication light will flash. If using Remote Control press the ― ‖key.
To on the light press key E. To off the light press key E again.
When the appliance and light are ON together or separately, press key A and
the Automatic Stop Timer will start the 15 minute count down. Indication
light on the key A button will flash for the duration. To stop the Automatic
Stop Timer Function before the 15 minutes time frame ends, press key A
again.
•COMANDS PATTERN :( Fig.22)
A= Filtering system / Set clock
B= Delay Timer
C= Speed 1/ ―-‖ adjust / off
D= Digital display
E= Speed 1/ ―+‖ adjust / off
F= Alarm
G= Light
When the Key A is flashing, at the same time " ‖is flashing on the
digital display, it reminds the user to clean the filters. After it’s cleaned and
then assemble back, push the key A till the light is off to set the function
again.
When pushing key A for 3 seconds, the clock ― ‖on the digital