Full Product Manual

Step 1
Step 2
Hardware will be attached to the faucet
during shipping. Remove hardware from
the faucet to begin installation. Remove
the Nut, Metal Ring, Silicone Ring and
Plastic Holder. Set aside this hardware for
the next installation step.
Insert faucet through the top hole of in-
stallation site. Attach Plastic Holder (A),
Silicone Ring (B), Metal Ring (C) under
the faucet. Use the Nut (D) provided to
hold sink and hardware into place. Once
tightened, use the Screws (E) located on
the nut to firmly secure into place.
8
A. Plastic Holder
B. Silicone Ring
C. Metal Ring
D. Nut
E. Screws