Installation Instructions

TABLE OF CONTENTS

RANGE SAFETY ...................................................................................................2

INSTALLATION REQUIREMENTS ......................................................................... 4

Tools and Parts ............................................................................................................... 4

Location Requirements .................................................................................................6

Electrical Requirements ................................................................................................9

Gas Supply Requirements ...........................................................................................10

INSTALLATION INSTRUCTIONS ........................................................................13

Step 1 - Unpack Range ................................................................................................13

Step 2 - Install Backsplash ...........................................................................................13

Step 3 - Install Anti-tip Bracket ...................................................................................15

Step 4 - Make Gas Connection ....................................................................................17

Step 5 - Make Electrical Connection ...........................................................................19

Step 6 - Install Range ...................................................................................................19

Step 7 - Level the Range (if needed) ..........................................................................21

Step 8 - Check Operation of Electronic Ignition System ...........................................21

GAS CONVERSION ............................................................................................ 22

Step 1 - Adjust the Regulator ......................................................................................25

  .................................................................................26

Step 3 - Adjust Burner Flames ....................................................................................27

Step 4 - Testing Flame Stability ...................................................................................28

Step 5 - Flame Re-Check .............................................................................................28