Full Product Manual

33 34

ELECTRICAL CONNECTION

Electrical Shock Hazard

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Electrical connection must be performed by a qualified service technician in accordance with

the kit instructions and all local codes and requirements.

• If you wish to install this appliance with a plug, it must installed by a qualified service technician.

The plug must be a 4-prong, 3-phase power plug that is designed specifically for ranges and ovens.

Electrical Requirements: 220-240V/50-60Hz, 35 Amps

ELECTRICAL SPECIFICATIONS

SYSTEM

WATTAGE

Upper Heating Element

2200W

Bottom Heating Element

1800W

Grill Heating Element

2900W

Convection Heating Element

2 x 1550W

Ventilator Motor

2 x 30W

Cooling Fan

11W

Oven Light

2 x 25W

BEFORE MAKING THE ELECTRICAL CONNECTION, MAKE SURE THAT:

• The safety circuit-breaker and the electrical system are able to with stand the load of the

appliance. See rating label on back of range.

• Rating plate is located on back of range should you need to verify any of the electrical

requirements.

• The power supply system has a ground connection in good working order in accordance with the

regulations in force.

• The electrical socket is easily accessible with the appliance installed. In all cases, the power

supply lead must be positioned so that it does not reach a temperature of 50

C above the room

temperature at any point.

• The manufacturer is not liable for any direct or indirect damage caused by faulty installation or

connection. It is therefore necessary that all installation and connection operations are carried out by

qualified personnel complying with the local and general regulations in force.