Instructions / Assembly

If the information in this manual is not followed exactly, a fire or explosion may result causing property
damage, personal injury or death.
•
FOR YOUR SAFETY:
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
•
WHAT TO DO IF YOU SMELL GAS:
- Do not try to light any appliance.
- Do not touch any electrical switch; do not use any phone in your building.
- Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s
instructions.
- If you cannot reach your gas supplier, call the fire department.
− Gas leaks cannot always be detected by smell.
− Gas suppliers recommend that you use a gas detector approved by UL or CSA.
− For more information, contact your gas supplier.
− If a gas leak is detected, follow the “What to do if you smell gas” instructions.
In the State of Massachusetts, the following installation instructions apply:
− Installations and repairs must be performed by a qualified or licensed contractor, plumber, or
gasfitter qualified or licensed by the State of Massachusetts.
− If using a ball valve, it shall be a T-handle type.
− A flexible gas connector, when used, must not exceed 3 feet.
•
Installation and service must be performed by a qualified installer, servicer or the gas supplier.
Ask your dealer to recommend a qualified technician and an authorized repair service. Know how to
shut off gas supply at the meter and disconnect the electrical power to the appliance at the circuit
breaker or fuse box in case of an emergency.