User Manual

11
1. Take o the lid.
2. Use a tool to adjust the 3 tabs on the
kettle lid. [Figure 2.1-2.2]
3. If you push the tabs in, the lid will fit
more loosely, and will be easier to put
on and take o.
4. If you push the tabs out, the lid will fit
more tightly, and will not come o as
easily.
5. After adjusting the tabs, put the lid back
on and take it o again to see if the fit
is correct. If not, adjust the tabs again
until the lid fits the way you prefer.
USING YOUR KETTLE (CONT.)
If you feel the kettle lid fits too loosely or
is too hard to take o, you can adjust the
tightness of the lid.
Adjusting Lid Tightness
Boil-Dry Protection
Your kettle is equipped with boil-dry
protection. If there is less than ½ cup /
118 mL of water in the kettle, the heat will
automatically shut o. Allow the kettle to
cool and add more water before using again.
If all buttons blink and the kettle beeps, then
unplug the power cord to reset the kettle
before turning on again.
Figure 2.1
Figure 2.2