User Manual

8
BEFORE FIRST USE
Water Test
Perform the Water Test before using your
kettle to make sure it’s working properly. Do
not drink the water that is boiled during this
test.
1. Remove all packaging from your kettle
and its accessories.
2. Completely unravel the power cable
and place the power base on a flat,
level, stable surface.
3. Fill the kettle with water to the “MAX”
line [Figure 1.0], then put the lid on the
kettle. Press firmly to make sure the lid
fits securely.
4. Press (“ON / OFF”). Then, press
212°F (“BOIL BLACK”).
5. The kettle will automatically turn o
once it has finished boiling the water.
Allow it to cool, then pour out the
water. Rinse thoroughly 2–3 times with
cold water.
Figure 1.0
M
A
X