Manualshelf

Specification Sheet

ManualsBrandsCost Less Lighting ManualsFlood & Security LightsLED Flood And Area Light Multi-Purpose - 15,131 Lumens - 150 Watt - 5000 Kelvin - DLC Listed - 5 Year Warranty
123
T3 = Type III
***
T3 = Type III
T3 = Type III
Type V
Type V
Type V
BEST LIGHTING PRODUCTS • 1213 ETNA PARKWAY, PATASKALA OH 43062 • 740-964-1198 • www.bestlighting.net
Specifications and dimensions subject to change without notice.
▪
Available in 3000k (warm white), 4000K (neutral white) and
5000K (cool white).
*
▪ Long-life LEDs provide 58,000 hours of operation with at
least 70% of initial lumen output (L
70
).
**
▪
Standard optic provides an IES roadway type V distribution, or
a 7V (vertical) x 7H (horizontal) NEMA floodlight distribution.
▪
Type III models deliver 18,303 lumens & 120 lumens per watt
(LPW) at 3000k, 4000k and 5000k.
*
▪
Type V models deliver 19,887 lumens & 130 LPW at 3000k;
18,486 lumens & 121 LPW at 4000k; and 18,752 lumens & 123
LPW at 5000k.
*
▪
Universal 120-277 AC voltage (50-60Hz) is standard.
▪
0-10vdc dimming capability is standard.
▪
Power factor > 0.90.
▪
Total harmonic distortion < 20%.
▪
Color rendering index > 80.
▪
Optional full glare shields, half glare shields & wire guards are
available.
▪
Die cast aluminum housing with durable, dark bronze
powder coat finish, and a heat-resistant polycarbonate lens.
▪
Wireway enclosure is sealed with a water-tight, silicon
rubber gasket.
▪
Effective projected areas (EPA's) are:
Front = 0.38 square feet
Side = 0.30 square feet
Face = 1.04 square feet
▪
Threaded receptacle (½” NPS) for photocell. Optional arms
and slip-fitters provide additional photocell mounting options.
▪
Easy installation in new construction or retrofit applications.
*
Contact factory for other color temperatures and lumen packages.
**
L
70
hours are IES TM-21-11 calculated hours.
Shown with
standard
trunnion
mount
Steel Arm
Mount Option
Slip-Fitter
Mount Option
Yoke Mount
Option
▪
Trunnion mount is standard.
▪
Slip-fitter mount provides attachment to poles (2 ⅜” O.D. tenon).
▪
Steel arm mount provides secure attachment to flat surfaces.
▪
Yoke mount models are available by special order.
MOUNTING OPTIONS
WARRANTY & LISTINGS
▪
cULus listed for wet locations (-30°C to 40°C / -22°F to 104°F)
▪
IP65 rated.
▪
DLC standard approved (except as noted below).
▪
Complies with FCC Part 15, Class B.
▪
Complies with EN61000-4-5, surge immunity (6kV).
▪
5-year warranty on all electronics and housing.
Shown with
optional yoke
mount
12 ⅝”
9 ⅞”
3 ⅜”
DIMENSIONS
Weight: 9.6 lb.
LEDMPAL150
Luminaire
Watts
153
Luminaire
Lumens
Lumens /
Watt
ORDERING INFORMATION
Model
Color
Temp.
3K = 3000k
4K = 4000k
5K = 5000k
3K = 3000k
4K = 4000k
5K = 5000k
Mounting
Type
T = Trunnion
*
Y = Yoke
18,303
18,303
18,303
19,887
18,486
18,752
120
120
120
130
121
123
*
Note: For Slip-Fitter or Steel Arm mounting, order a luminaire with the standard Trunnion mount installed (LEDMPAL150-T), and either the Slip-Fitter (LEDMPAL-SF-80/300) or Steel Arm
(LEDMPAL-A-80/300). The Slip-Fitter and Steel Arm mounts are shipped in separate cartons than the luminaire, and are field-installed after removing the standard Trunnion mount.
**
Note: Type V distribution is standard, and requires no order suffix (see example above). For NEMA flood 7H x 7V distributions, order the Type V option.
***
Note: DLC 4.2 listing is pending.
LEDMPAL150
Distribution
Type
**
Project:
Type:
Catalog #:
STANDARD
W
E
T
IP
65
6kV
Surge
Protection
150 Watt Multi-Purpose LED Area Light
Examples: (Slip-Fitter, Type III): LEDMPAL150-T-4K-T3 + LEDMPAL-SF-80/300
(Yoke, Type V): LEDMPAL150-Y-4K (no options available)
(Arm, NEMA 7H x 7V) LEDMPAL150-T-4K + LEDMPAL-A-80/300
The LEDMPAL series is a group of architectural LED area
luminaires designed to illuminate parking areas, pathways,
building facades, loading docks, and a wide variety of other
large, general site lighting applications. Multiple mounting
options make the LEDMPAL a versatile luminaire for flood
lighting, pole-, ground- and wall-mounted area lighting, and
other outdoor lighting requirements.
FEATURES
Options
*
(Order Separately)
LEDMPAL-SF-80/300 = Slip-Fitter Mount
LEDMPAL-A-80/300 = Steel Arm Mount
MPAL80/100/150-FGS = Full Glare Shield
MPAL80/100/150-HGS = Half Glare Shield
MPAL80/100/150-WG = Wire Guard
06-LEDWPC50W/80W
50 & 80 Watt LED Area Ligh
APPLICATIONS
The LEDWPC50W/80W is a contemporary, commer-
cial-grade area luminaire, which can be wall-, ground-
or pole-mounted to provide outdoor perimeter, area,
and floodlighting. With a die cast aluminum housing and
a tempered glass lens, the LEDWPC50W/80W will
stand up to many years of punishing environmental
conditions. High-efficacy, long-life LEDs provide both
energy and maintenance cost savings compared to
traditional, HID area lights.
FEATURES
• Available in 4000k (neutral white) and 5000k (cool white)
color temperature.*
• Long-life LEDs provide 79,000 (LEDWPC50W) or 121,000
(LEDWPC80W) hours of operation with at least 70% of initial
lumens output (L
70
).**
• LEDWPC50W delivers 4,183 lumens (84 LPW) at both
4000k and 5000k.*
• LEDWPC80W delivers 6,919 lumens (86 LPW) at both
4000k and 5000k.*
• Universal 100-277 AC voltage (50-60Hz) is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%
• Color rendering index > 80.
• Die cast aluminum housing with durable, dark bronze,
powder coat paint.
• Tempered glass lens.
• Removable, threaded plus for side attachment of ½” rigid
electrical conduit, or for button photocells.
• Easy installation in new construction or retrofit.
* contact factory for other color temperatures and lumen packages.
**L
70
hours are IES TM-21-11 calculated hours.
PRODUCT PARAMETER
LUMINAIRE
WATTS
50
LUMINAIRE
LUMENS
4,183
Example: 06-LEDWPC50W-4K + LEDWPC-A
LUMENS
PER WATTS
84
COLOR
TEMPERATURE
4K = 4000K Square Arm Mount - LEDWPC-A
Slip-Fier Mount - LEDWPC-SF
MOUNTING OPTIONS
(ORDER SEPARATELY)
MODEL
06-LEDWPC50W-4K
50 4,183 84 5K = 5000K06-LEDWPC50W-5K
80 6,919 86 4K = 4000K06-LEDWPC80W-4K
80 6,919 86 5K = 5000K06-LEDWPC80W-5K
DIMENSIONS
9 ½”
11 ¼”
4”
WARRANTY/LISTING
• cULus listed for wet locations (-20°C to 40°C / -4°F to
104°F).
• DLC Approved.
• IP65 rated.
• Tested and approved to UL1598, UL8750 and IEC60598
safety standards.
• 5-year warranty of all electronics and housing.
MOUNTING OPTIONS
• Wall-mount plate is standard.
• Square arm option provides secure attachment to square poles, walls, and other flat
surfaces.
• Slip-fitter mount provides attachment to poles (2
3
/
8
” O.D. Tenon).
Square Arm
(LEDWPC-A)
Slip-Fier
(LEDWPC-SF)
STANDARD
Cost Less Lighting • p. 866.633.6883 • f. 866.699.8099 • www.costlesslighting.com
APPLICATIONS
The 08-LEDMPAL series is a group of architectural LED
area luminaires designed to illuminate parking areas,
pathways, building facades, loading docks, and a wide
variety of other large, general site lighting applications.
Multiple mounting options make the 08-LEDMPAL a
versatile luminaire for flood lighting, pole-, ground-
and wall-mounted area lighting, and other outdoor
lighting requirements.
FEATURES
▪ Available in 3000k (warm white), 4000K (neutral white) and
5000K (cool white)*
• Long-life LEDs provide 58,000 hours of operation with at least
70% of initial lumen output (L
70
)**
• Standard optic provides an IES roadway type V distribution, or a
7V (vertical) x 7H (horizontal) NEMA floodlight distribution
• Type III models deliver 18,303 lumens & 120 lumens per watt
(LPW) at 3000k, 4000k and 5000k*
• Type V models deliver 19,887 lumens & 130 LPW at 3000k;
18,486 lumens & 121 LPW at 4000k; and 18,752 lumens & 123
LPW at 5000k*
• Universal 120-277 AC voltage (50-60Hz) is standard
• 0-10vdc dimming capability is standard
• Power factor > 0.90
• Total harmonic distortion < 20%
• Color rendering index > 80
• Optional full glare shields, half glare shields & wire guards
are available
• Die cast aluminum housing with durable, dark bronze powder coat
finish, and a heat-resistant polycarbonate lens
• Wireway enclosure is sealed with a water-tight, silicon rubber gasket
• Effective projected areas (EPA’s) are:
• Front = 0.38 square feet
• Side = 0.30 square feet
• Face = 1.04 square feet
• Threaded receptacle (½″ NPS) for photocell. Optional arms and
slip-fitters provide additional photocell mounting options
• Easy installation in new construction or retrofit applications
* Contact factory for other color temperatures and lumen packages.
** L
70
hours are IES TM-21-11 calculated hours.
ORDERING INFORMATION
LED Dusk-to-Dawn
Security / Flood
Light Sensor Photocell
Cost Less Lighting • p. 866.633.6883 • f. 866.699.8099 • www.costlesslighting.com
APPLICATIONS
The 08-DD-LED-PC dusk-to-dawn security/flood light is an ideal
solution for general site and flood lighting in commercial and
residential settings. With a die cast aluminum housing and a
fluted, polycarbonate lens shield to reduce glare, the
08-DD-LED-PC provides effective, economical security lighting.
High-efficacy, long-life LEDs provide both energy and
maintenance sot savings compared to traditional, incandescent
and HID security/flood lights.
FEATURES
• Available in 5000k color temperature.*
• Long-life LEDs provide 55,000 hours of operation with at least 70% of
initial lumens output (L
70
).**
• Delivers 5,027 lumens and 99 lumens per watt.*
• Universal 120-277 AC voltage (50-60Hz) is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%
• Color rendering index > 80.
• Die cast aluminum housing.
• Fluted, polycarbonate lens shield to reduce glare.
• NEMA-type photocell and mounting arm are included.
• Easy installation in new construction or retrofit.
* Contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.
WARRANTY & LISTINGS
• cULus listed for wet locations (-20°C to 40°C / -4°F to 104°F).
• DLC approved.
• Complies with FCC Part 15, Class B.
• 5-year warranty on all electronics and housing.
MOUNTING OPTIONS
• Wall-mount attachment is standard.
• Extruded aluminum extension arm (15” height, 13” width, 1⅝”
diameter) is also standard.
COLOR
TEMPERATURE
5000k
CRI
>80
LUMINAIRE
LUMENS
5,027
LUMINAIRE
WATTS
51
LUMENS/
WATT
99
INPUT
VOLTAGE
120-277
INPUT CURRENT (A)
120V
0.43
240V
0.21
277V
0.18
POWER
FACTOR
>90%
THD
<20%
L70
HOURS
55,000
MODEL
08-DD-LED-PC-50
08-LEDMPAL150
150 WATT MULTI-PURPOSE LED AREA LIGHT
6kV
SURGE
PROTECTION
IC
INSULATED CEILING
6kV
SURGE
PROTECTION
IC
INSULATED CEILING
6kV
SURGE
PROTECTION
IC
INSULATED CEILING
Cost Less Lighting • p. 866.633.6883 • f. 866.699.8099 • www.costlesslighting.com
LED Dusk-to-Dawn
Security / Flood
Light Sensor Photocell
Cost Less Lighting • p. 866.633.6883 • f. 866.699.8099 • www.costlesslighting.com
APPLICATIONS
The 08-DD-LED-PC dusk-to-dawn security/flood light is an ideal
solution for general site and flood lighting in commercial and
residential settings. With a die cast aluminum housing and a
fluted, polycarbonate lens shield to reduce glare, the
08-DD-LED-PC provides effective, economical security lighting.
High-efficacy, long-life LEDs provide both energy and
maintenance sot savings compared to traditional, incandescent
and HID security/flood lights.
FEATURES
• Available in 5000k color temperature.*
• Long-life LEDs provide 55,000 hours of operation with at least 70% of
initial lumens output (L
70
).**
• Delivers 5,027 lumens and 99 lumens per watt.*
• Universal 120-277 AC voltage (50-60Hz) is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%
• Color rendering index > 80.
• Die cast aluminum housing.
• Fluted, polycarbonate lens shield to reduce glare.
• NEMA-type photocell and mounting arm are included.
• Easy installation in new construction or retrofit.
* Contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.
WARRANTY & LISTINGS
• cULus listed for wet locations (-20°C to 40°C / -4°F to 104°F).
• DLC approved.
• Complies with FCC Part 15, Class B.
• 5-year warranty on all electronics and housing.
MOUNTING OPTIONS
• Wall-mount attachment is standard.
• Extruded aluminum extension arm (15” height, 13” width, 1⅝”
diameter) is also standard.
COLOR
TEMPERATURE
5000k
CRI
>80
LUMINAIRE
LUMENS
5,027
LUMINAIRE
WATTS
51
LUMENS/
WATT
99
INPUT
VOLTAGE
120-277
INPUT CURRENT (A)
120V
0.43
240V
0.21
277V
0.18
POWER
FACTOR
>90%
THD
<20%
L70
HOURS
55,000
MODEL
08-DD-LED-PC-50
T3 = Type III
***
T3 = Type III
T3 = Type III
Type V
Type V
Type V
BEST LIGHTING PRODUCTS • 1213 ETNA PARKWAY, PATASKALA OH 43062 • 740-964-1198 • www.bestlighting.net
Specifications and dimensions subject to change without notice.
▪ Available in 3000k (warm white), 4000K (neutral white) and
5000K (cool white).
*
▪ Long-life LEDs provide 58,000 hours of operation with at
least 70% of initial lumen output (L
70
).
**
▪ Standard optic provides an IES roadway type V distribution, or
a 7V (vertical) x 7H (horizontal) NEMA floodlight distribution.
▪ Type III models deliver 18,303 lumens & 120 lumens per watt
(LPW) at 3000k, 4000k and 5000k.
*
▪ Type V models deliver 19,887 lumens & 130 LPW at 3000k;
18,486 lumens & 121 LPW at 4000k; and 18,752 lumens & 123
LPW at 5000k.
*
▪ Universal 120-277 AC voltage (50-60Hz) is standard.
▪ 0-10vdc dimming capability is standard.
▪ Power factor > 0.90.
▪ Total harmonic distortion < 20%.
▪ Color rendering index > 80.
▪ Optional full glare shields, half glare shields & wire guards are
available.
▪ Die cast aluminum housing with durable, dark bronze
powder coat finish, and a heat-resistant polycarbonate lens.
▪ Wireway enclosure is sealed with a water-tight, silicon
rubber gasket.
▪ Effective projected areas (EPA's) are:
Front = 0.38 square feet
Side = 0.30 square feet
Face = 1.04 square feet
▪ Threaded receptacle (½” NPS) for photocell. Optional arms
and slip-fitters provide additional photocell mounting options.
▪ Easy installation in new construction or retrofit applications.
*
Contact factory for other color temperatures and lumen packages.
**
L
70
hours are IES TM-21-11 calculated hours.
Shown with
standard
trunnion
mount
Steel Arm
Mount Option
Slip-Fitter
Mount Option
Yoke Mount
Option
▪ Trunnion mount is standard.
▪ Slip-fitter mount provides attachment to poles (2 ⅜” O.D. tenon).
▪ Steel arm mount provides secure attachment to flat surfaces.
▪ Yoke mount models are available by special order.
MOUNTING OPTIONS
WARRANTY & LISTINGS
▪ cULus listed for wet locations (-30°C to 40°C / -22°F to 104°F)
▪ IP65 rated.
▪ DLC standard approved (except as noted below).
▪ Complies with FCC Part 15, Class B.
▪ Complies with EN61000-4-5, surge immunity (6kV).
▪ 5-year warranty on all electronics and housing.
Shown with
optional yoke
mount
12 ⅝”
9 ⅞”
3 ⅜”
DIMENSIONS
Weight: 9.6 lb.
LEDMPAL150
Luminaire
Watts
153
Luminaire
Lumens
Lumens /
Watt
ORDERING INFORMATION
Model
Color
Temp.
3K = 3000k
4K = 4000k
5K = 5000k
3K = 3000k
4K = 4000k
5K = 5000k
Mounting
Type
T = Trunnion
*
Y = Yoke
18,303
18,303
18,303
19,887
18,486
18,752
120
120
120
130
121
123
*
Note: For Slip-Fitter or Steel Arm mounting, order a luminaire with the standard Trunnion mount installed (LEDMPAL150-T), and either the Slip-Fitter (LEDMPAL-SF-80/300) or Steel Arm
(LEDMPAL-A-80/300). The Slip-Fitter and Steel Arm mounts are shipped in separate cartons than the luminaire, and are field-installed after removing the standard Trunnion mount.
**
Note: Type V distribution is standard, and requires no order suffix (see example above). For NEMA flood 7H x 7V distributions, order the Type V option.
***
Note: DLC 4.2 listing is pending.
LEDMPAL150
Distribution
Type
**
Project:
Type:
Catalog #:
STANDARD
WET
IP65
6kV
Surge
Protection
150 Watt Multi-Purpose LED Area Light
Examples: (Slip-Fitter, Type III): LEDMPAL150-T-4K-T3 + LEDMPAL-SF-80/300
(Yoke, Type V): LEDMPAL150-Y-4K (no options available)
(Arm, NEMA 7H x 7V) LEDMPAL150-T-4K + LEDMPAL-A-80/300
The LEDMPAL series is a group of architectural LED area
luminaires designed to illuminate parking areas, pathways,
building facades, loading docks, and a wide variety of other
large, general site lighting applications. Multiple mounting
options make the LEDMPAL a versatile luminaire for flood
lighting, pole-, ground- and wall-mounted area lighting, and
other outdoor lighting requirements.
FEATURES
Options
*
(Order Separately)
LEDMPAL-SF-80/300 = Slip-Fitter Mount
LEDMPAL-A-80/300 = Steel Arm Mount
MPAL80/100/150-FGS = Full Glare Shield
MPAL80/100/150-HGS = Half Glare Shield
MPAL80/100/150-WG = Wire Guard
T3 = Type III
***
T3 = Type III
T3 = Type III
Type V
Type V
Type V
BEST LIGHTING PRODUCTS • 1213 ETNA PARKWAY, PATASKALA OH 43062 • 740-964-1198 • www.bestlighting.net
Specifications and dimensions subject to change without notice.
▪ Available in 3000k (warm white), 4000K (neutral white) and
5000K (cool white).
*
▪ Long-life LEDs provide 58,000 hours of operation with at
least 70% of initial lumen output (L
70
).
**
▪ Standard optic provides an IES roadway type V distribution, or
a 7V (vertical) x 7H (horizontal) NEMA floodlight distribution.
▪ Type III models deliver 18,303 lumens & 120 lumens per watt
(LPW) at 3000k, 4000k and 5000k.
*
▪ Type V models deliver 19,887 lumens & 130 LPW at 3000k;
18,486 lumens & 121 LPW at 4000k; and 18,752 lumens & 123
LPW at 5000k.
*
▪ Universal 120-277 AC voltage (50-60Hz) is standard.
▪ 0-10vdc dimming capability is standard.
▪ Power factor > 0.90.
▪ Total harmonic distortion < 20%.
▪ Color rendering index > 80.
▪ Optional full glare shields, half glare shields & wire guards are
available.
▪ Die cast aluminum housing with durable, dark bronze
powder coat finish, and a heat-resistant polycarbonate lens.
▪ Wireway enclosure is sealed with a water-tight, silicon
rubber gasket.
▪ Effective projected areas (EPA's) are:
Front = 0.38 square feet
Side = 0.30 square feet
Face = 1.04 square feet
▪ Threaded receptacle (½” NPS) for photocell. Optional arms
and slip-fitters provide additional photocell mounting options.
▪ Easy installation in new construction or retrofit applications.
*
Contact factory for other color temperatures and lumen packages.
**
L
70
hours are IES TM-21-11 calculated hours.
Shown with
standard
trunnion
mount
Steel Arm
Mount Option
Slip-Fitter
Mount Option
Yoke Mount
Option
▪ Trunnion mount is standard.
▪ Slip-fitter mount provides attachment to poles (2 ⅜” O.D. tenon).
▪ Steel arm mount provides secure attachment to flat surfaces.
▪ Yoke mount models are available by special order.
MOUNTING OPTIONS
WARRANTY & LISTINGS
▪ cULus listed for wet locations (-30°C to 40°C / -22°F to 104°F)
▪ IP65 rated.
▪ DLC standard approved (except as noted below).
▪ Complies with FCC Part 15, Class B.
▪ Complies with EN61000-4-5, surge immunity (6kV).
▪ 5-year warranty on all electronics and housing.
Shown with
optional yoke
mount
12 ⅝”
9 ⅞”
3 ⅜”
DIMENSIONS
Weight: 9.6 lb.
LEDMPAL150
Luminaire
Watts
153
Luminaire
Lumens
Lumens /
Watt
ORDERING INFORMATION
Model
Color
Temp.
3K = 3000k
4K = 4000k
5K = 5000k
3K = 3000k
4K = 4000k
5K = 5000k
Mounting
Type
T = Trunnion
*
Y = Yoke
18,303
18,303
18,303
19,887
18,486
18,752
120
120
120
130
121
123
*
Note: For Slip-Fitter or Steel Arm mounting, order a luminaire with the standard Trunnion mount installed (LEDMPAL150-T), and either the Slip-Fitter (LEDMPAL-SF-80/300) or Steel Arm
(LEDMPAL-A-80/300). The Slip-Fitter and Steel Arm mounts are shipped in separate cartons than the luminaire, and are field-installed after removing the standard Trunnion mount.
**
Note: Type V distribution is standard, and requires no order suffix (see example above). For NEMA flood 7H x 7V distributions, order the Type V option.
***
Note: DLC 4.2 listing is pending.
LEDMPAL150
Distribution
Type
**
Project:
Type:
Catalog #:
STANDARD
WET
IP65
6kV
Surge
Protection
150 Watt Multi-Purpose LED Area Light
Examples: (Slip-Fitter, Type III): LEDMPAL150-T-4K-T3 + LEDMPAL-SF-80/300
(Yoke, Type V): LEDMPAL150-Y-4K (no options available)
(Arm, NEMA 7H x 7V) LEDMPAL150-T-4K + LEDMPAL-A-80/300
The LEDMPAL series is a group of architectural LED area
luminaires designed to illuminate parking areas, pathways,
building facades, loading docks, and a wide variety of other
large, general site lighting applications. Multiple mounting
options make the LEDMPAL a versatile luminaire for flood
lighting, pole-, ground- and wall-mounted area lighting, and
other outdoor lighting requirements.
FEATURES
Options
*
(Order Separately)
LEDMPAL-SF-80/300 = Slip-Fitter Mount
LEDMPAL-A-80/300 = Steel Arm Mount
MPAL80/100/150-FGS = Full Glare Shield
MPAL80/100/150-HGS = Half Glare Shield
MPAL80/100/150-WG = Wire Guard
Shown with standard
trunnion mount
Shown with optional
yoke mount
T3 = Type III
***
T3 = Type III
T3 = Type III
Type V
Type V
Type V
BEST LIGHTING PRODUCTS • 1213 ETNA PARKWAY, PATASKALA OH 43062 • 740-964-1198 • www.bestlighting.net
Specifications and dimensions subject to change without notice.
▪ Available in 3000k (warm white), 4000K (neutral white) and
5000K (cool white).
*
▪ Long-life LEDs provide 58,000 hours of operation with at
least 70% of initial lumen output (L
70
).
**
▪ Standard optic provides an IES roadway type V distribution, or
a 7V (vertical) x 7H (horizontal) NEMA floodlight distribution.
▪ Type III models deliver 18,303 lumens & 120 lumens per watt
(LPW) at 3000k, 4000k and 5000k.
*
▪ Type V models deliver 19,887 lumens & 130 LPW at 3000k;
18,486 lumens & 121 LPW at 4000k; and 18,752 lumens & 123
LPW at 5000k.
*
▪ Universal 120-277 AC voltage (50-60Hz) is standard.
▪ 0-10vdc dimming capability is standard.
▪ Power factor > 0.90.
▪ Total harmonic distortion < 20%.
▪ Color rendering index > 80.
▪ Optional full glare shields, half glare shields & wire guards are
available.
▪ Die cast aluminum housing with durable, dark bronze
powder coat finish, and a heat-resistant polycarbonate lens.
▪ Wireway enclosure is sealed with a water-tight, silicon
rubber gasket.
▪ Effective projected areas (EPA's) are:
Front = 0.38 square feet
Side = 0.30 square feet
Face = 1.04 square feet
▪ Threaded receptacle (½” NPS) for photocell. Optional arms
and slip-fitters provide additional photocell mounting options.
▪ Easy installation in new construction or retrofit applications.
*
Contact factory for other color temperatures and lumen packages.
**
L
70
hours are IES TM-21-11 calculated hours.
Shown with
standard
trunnion
mount
Steel Arm
Mount Option
Slip-Fitter
Mount Option
Yoke Mount
Option
▪ Trunnion mount is standard.
▪ Slip-fitter mount provides attachment to poles (2 ⅜” O.D. tenon).
▪ Steel arm mount provides secure attachment to flat surfaces.
▪ Yoke mount models are available by special order.
MOUNTING OPTIONS
WARRANTY & LISTINGS
▪ cULus listed for wet locations (-30°C to 40°C / -22°F to 104°F)
▪ IP65 rated.
▪ DLC standard approved (except as noted below).
▪ Complies with FCC Part 15, Class B.
▪ Complies with EN61000-4-5, surge immunity (6kV).
▪ 5-year warranty on all electronics and housing.
Shown with
optional yoke
mount
12 ⅝”
9 ⅞”
3 ⅜”
DIMENSIONS
Weight: 9.6 lb.
LEDMPAL150
Luminaire
Watts
153
Luminaire
Lumens
Lumens /
Watt
ORDERING INFORMATION
Model
Color
Temp.
3K = 3000k
4K = 4000k
5K = 5000k
3K = 3000k
4K = 4000k
5K = 5000k
Mounting
Type
T = Trunnion
*
Y = Yoke
18,303
18,303
18,303
19,887
18,486
18,752
120
120
120
130
121
123
*
Note: For Slip-Fitter or Steel Arm mounting, order a luminaire with the standard Trunnion mount installed (LEDMPAL150-T), and either the Slip-Fitter (LEDMPAL-SF-80/300) or Steel Arm
(LEDMPAL-A-80/300). The Slip-Fitter and Steel Arm mounts are shipped in separate cartons than the luminaire, and are field-installed after removing the standard Trunnion mount.
**
Note: Type V distribution is standard, and requires no order suffix (see example above). For NEMA flood 7H x 7V distributions, order the Type V option.
***
Note: DLC 4.2 listing is pending.
LEDMPAL150
Distribution
Type
**
Project:
Type:
Catalog #:
STANDARD
WET
IP65
6kV
Surge
Protection
150 Watt Multi-Purpose LED Area Light
Examples: (Slip-Fitter, Type III): LEDMPAL150-T-4K-T3 + LEDMPAL-SF-80/300
(Yoke, Type V): LEDMPAL150-Y-4K (no options available)
(Arm, NEMA 7H x 7V) LEDMPAL150-T-4K + LEDMPAL-A-80/300
The LEDMPAL series is a group of architectural LED area
luminaires designed to illuminate parking areas, pathways,
building facades, loading docks, and a wide variety of other
large, general site lighting applications. Multiple mounting
options make the LEDMPAL a versatile luminaire for flood
lighting, pole-, ground- and wall-mounted area lighting, and
other outdoor lighting requirements.
FEATURES
Options
*
(Order Separately)
LEDMPAL-SF-80/300 = Slip-Fitter Mount
LEDMPAL-A-80/300 = Steel Arm Mount
MPAL80/100/150-FGS = Full Glare Shield
MPAL80/100/150-HGS = Half Glare Shield
MPAL80/100/150-WG = Wire Guard
T3 = Type III
***
T3 = Type III
T3 = Type III
Type V
Type V
Type V
BEST LIGHTING PRODUCTS • 1213 ETNA PARKWAY, PATASKALA OH 43062 • 740-964-1198 • www.bestlighting.net
Specifications and dimensions subject to change without notice.
▪ Available in 3000k (warm white), 4000K (neutral white) and
5000K (cool white).
*
▪ Long-life LEDs provide 58,000 hours of operation with at
least 70% of initial lumen output (L
70
).
**
▪ Standard optic provides an IES roadway type V distribution, or
a 7V (vertical) x 7H (horizontal) NEMA floodlight distribution.
▪ Type III models deliver 18,303 lumens & 120 lumens per watt
(LPW) at 3000k, 4000k and 5000k.
*
▪ Type V models deliver 19,887 lumens & 130 LPW at 3000k;
18,486 lumens & 121 LPW at 4000k; and 18,752 lumens & 123
LPW at 5000k.
*
▪ Universal 120-277 AC voltage (50-60Hz) is standard.
▪ 0-10vdc dimming capability is standard.
▪ Power factor > 0.90.
▪ Total harmonic distortion < 20%.
▪ Color rendering index > 80.
▪ Optional full glare shields, half glare shields & wire guards are
available.
▪ Die cast aluminum housing with durable, dark bronze
powder coat finish, and a heat-resistant polycarbonate lens.
▪ Wireway enclosure is sealed with a water-tight, silicon
rubber gasket.
▪ Effective projected areas (EPA's) are:
Front = 0.38 square feet
Side = 0.30 square feet
Face = 1.04 square feet
▪ Threaded receptacle (½” NPS) for photocell. Optional arms
and slip-fitters provide additional photocell mounting options.
▪ Easy installation in new construction or retrofit applications.
*
Contact factory for other color temperatures and lumen packages.
**
L
70
hours are IES TM-21-11 calculated hours.
Shown with
standard
trunnion
mount
Steel Arm
Mount Option
Slip-Fitter
Mount Option
Yoke Mount
Option
▪ Trunnion mount is standard.
▪ Slip-fitter mount provides attachment to poles (2 ⅜” O.D. tenon).
▪ Steel arm mount provides secure attachment to flat surfaces.
▪ Yoke mount models are available by special order.
MOUNTING OPTIONS
WARRANTY & LISTINGS
▪ cULus listed for wet locations (-30°C to 40°C / -22°F to 104°F)
▪ IP65 rated.
▪ DLC standard approved (except as noted below).
▪ Complies with FCC Part 15, Class B.
▪ Complies with EN61000-4-5, surge immunity (6kV).
▪ 5-year warranty on all electronics and housing.
Shown with
optional yoke
mount
12 ⅝”
9 ⅞”
3 ⅜”
DIMENSIONS
Weight: 9.6 lb.
LEDMPAL150
Luminaire
Watts
153
Luminaire
Lumens
Lumens /
Watt
ORDERING INFORMATION
Model
Color
Temp.
3K = 3000k
4K = 4000k
5K = 5000k
3K = 3000k
4K = 4000k
5K = 5000k
Mounting
Type
T = Trunnion
*
Y = Yoke
18,303
18,303
18,303
19,887
18,486
18,752
120
120
120
130
121
123
*
Note: For Slip-Fitter or Steel Arm mounting, order a luminaire with the standard Trunnion mount installed (LEDMPAL150-T), and either the Slip-Fitter (LEDMPAL-SF-80/300) or Steel Arm
(LEDMPAL-A-80/300). The Slip-Fitter and Steel Arm mounts are shipped in separate cartons than the luminaire, and are field-installed after removing the standard Trunnion mount.
**
Note: Type V distribution is standard, and requires no order suffix (see example above). For NEMA flood 7H x 7V distributions, order the Type V option.
***
Note: DLC 4.2 listing is pending.
LEDMPAL150
Distribution
Type
**
Project:
Type:
Catalog #:
STANDARD
WET
IP65
6kV
Surge
Protection
150 Watt Multi-Purpose LED Area Light
Examples: (Slip-Fitter, Type III): LEDMPAL150-T-4K-T3 + LEDMPAL-SF-80/300
(Yoke, Type V): LEDMPAL150-Y-4K (no options available)
(Arm, NEMA 7H x 7V) LEDMPAL150-T-4K + LEDMPAL-A-80/300
The LEDMPAL series is a group of architectural LED area
luminaires designed to illuminate parking areas, pathways,
building facades, loading docks, and a wide variety of other
large, general site lighting applications. Multiple mounting
options make the LEDMPAL a versatile luminaire for flood
lighting, pole-, ground- and wall-mounted area lighting, and
other outdoor lighting requirements.
FEATURES
Options
*
(Order Separately)
LEDMPAL-SF-80/300 = Slip-Fitter Mount
LEDMPAL-A-80/300 = Steel Arm Mount
MPAL80/100/150-FGS = Full Glare Shield
MPAL80/100/150-HGS = Half Glare Shield
MPAL80/100/150-WG = Wire Guard
Steel Arm
Mount Option
* Note: For Slip-Fitter or Steel Arm mounting, order a luminaire with the standard Trunnion mount installed (08-LEDMPAL150-T), and either the Slip-Fitter (08-LEDMPAL-SF-80/300) or Steel Arm
(08-LEDMPAL-A-80/300).
The Slip-Fitter and Steel Arm mounts are shipped in separate cartons than the luminaire, and are field-installed after removing the standard Trunnion mount.
** Note: Type V distribution is standard, and requires no order suffix (see example above). For NEMA flood 7H x 7V distributions, order the Type V option.
*** Note: DLC 4.2 listing is pending.
MODEL MOUNTING
TYPE
LUMINAIRE
WATTS
COLOR
TEMP.
DISTRIBUTION
TYPE**
LUMINAIRE
LUMENS
LUMENS /
WATT
OPTIONS*
(ORDER SEPARATELY)
08-LEDMPAL150
T = Trunnion*
Y = Yoke
153 3K = 3000k
4K = 4000k
5K = 5000k
3K = 3000k
4K = 4000k
5K = 5000k
T3 = Type III***
T3 = Type III
T3 = Type III
Type V
Type V
Type V
18,303
18,303
18,303
19,887
18,486
18,752
120
120
120
130
121
123
08-LEDMPAL-SF-80/300
08-LEDMPAL-A-80/300
MPAL80/100/150-FGS
MPAL80/100/150-HGS
MPAL80/100/150-WG
=
=
=
=
=
Slip-Fitter Mount
Steel Arm Mount
Full Glare Shield
Half Glare Shield
Wire Guard
WARRANTY & LISTINGS
▪ cULus listed for wet locations (-20°C to 45°C /
-4°F to 113°F)
• IP65 rated for ingress protection
• DLC standard approved
• Complies with FCC Part 15, class B
• Complies with EN61000-4-5, surge immunity
protection (1.2kV)
• 5-year warranty of all electronics and housing
MOUNTING ARM
• Trunnion mount is standard
• Slip-fitter mount provides attachment to poles
(2 ⅜″ O.D. tenon)
• Steel arm mount provides secure attachment to flat surfaces
• Yoke mount models are available by special order.

Summary of content (3 pages)