User manual

I. Turn the printer off.
2. Remove the spindle from the printer. (Diagram #I)
3. Find the Label Guide (Diagram #2) nested in the well of the
printer.
4. Remove the Label Guide by placing your finger in the
recessed semicircle and gently lifting the Label Guide from
its
compartment.
5. Hold the Label Guide as shown (Diagram #3).
6. Find the two small black vertical strips (Diagram #4) located
near the top center of the black well (closest
to the label
tear bar).
7. Position the Label Guide aligning the opening between the black
strips and press down firmly. The small knob
on the narrow end
of the opening should click into place.
8. Replace spindle.
9. Remember to remove the Label Guide when using labels
larger than
I ". You can store the Label Guide in the recessed
compartment.