EP23485WH 28” TOWER FAN READ AND SAVE THESE INSTRUCTIONS
CAUTION Read Rules of Safe Operation and Instructions Carefully. WARNING 1.To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control device. 2.If the power cord is damaged, stop using the product immediately. 3.This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
SPECIFICATIONS 1.Model No.: EP23485WH 2.Rated voltage: 120V~60Hz 3.Rated power: 35W PARTS NAME 1.Body 2.Front base 3.Rear base 4.Base clip 5.Power cord PARTS ASSEMBLY 1.Assemble the front and rear base by aligning the tabs and sliding them together until they form one base. 2.Place the assembled base on the bottom of the fan body, pull power cord through the hole in the center of the base until the base touches the bottom of the fan body. 3.
OPERATING INSTRUCTIONS A. Control parts description: 1.Speed switch 2.Body oscillating switch B. Instructions: 1. Plug the power cord into a wall outlet. 2. To improve air circulation, the fan can oscillate. To start the oscillation feature, press the oscillating switch (2). To stop the fan from oscillating, press the oscillation switch (2) again. 3. The fan has 3 speed settings, use the rotating speed switch (1) to select desired speed.
