USER'S MANUAL Stand Mixer EP24664
Technical Data Model: EP24664 Rated voltage: 120V~60Hz Power consumption: 660W IMPORTANT SAFEGUARDS Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions. ● Read all instructions.
Special safety Instructions for this Machine ● Only operate this machine under supervision. ● Do not interfere with any safety switches. ● Do not insert anything into the rotating hooks while the machine is working. ● Place the machine on a smooth, flat and stable working surface. ● Do not insert the mains plug of the machine into the power socket without having installed all the necessary accessories. Overload Protection System The motor is protected from burning out by a Thermal Protector.
Overview of the Components 5 1 6 9 7 2 3 4 8 Main Components and Standard Accessories: 1 Output shaft 6 Dough Hook with Silver Teflon coating 2 Tilt-up knob 7 Beater with Silver Teflon coating 3 Speed Control Dial 8 Whisk 4 Power Cord 9 Bowl cover 5 Mixing bowl Before using Stand Mixer 1. Before assembling the appliance, remove and safely discard any packaging material. 2.
Using Stand Mixer Step 1 Step 2 FIG1 FIG2 FIG3 FIG4 FIG5 FIG6 1. Set the Speed Control Dial to the “OFF” position. Note: If the Speed Control is not at 0, the machine’s safety feature will be triggered and it will not activate when switched on. If this happens, see Safety Instructions for how to get the appliance running. 2. Place one hand on top of the Mixer Head and with other hand downward rotating the Tilt Button as per the arrow showed to lift the Mixer Head up until it stops.
7. Place one hand on top of the Mixer Head and with other hand downward rotating the Tilt Button as per the arrow showed. Push the Mixer Head down so that it is in the horizontal position and the Dough Hook, Beater or Whisk attachment is inside the Mixing Bowl. Release the “Tilt” button. 8. Plug the power cord into the mains supply. This will make the Speed Control light up and flash blue. 9. Turn the Speed Control clockwise to select a speed and start mixing. The Speed Control Dial will illuminate blue.
Troubleshooting NO. Troubles Solution 1 The machine doesn't work ·Check if the plug is pluged into the socket well. ·Check if the Tilt-up Knob is back in place. ·Check if the machine works continuously more than 6 minutes, and wait until the motor cools down. 2 Noise in the mixing bowl when working (the accessory scraped the bowl) ·Check if the mixing bowl is properly installed. ·Check if the accessory is installed properly to the machine.
UNITED KINGDOM CANADA RUSSIA GERMANY FRANCE ITALY UNITED STATES SPAIN JAPAN AUSTRALIA TIPS: Your suggestions and comments for Costway are really important to us! We sincerely solicit you to go back to our shop and leave a good rating in just a simple click. It would be quite encouraging if you could kindly do so like below: Great products so far February 24, 2018 Great product so far. Fast delivery, easy setup, and working without any issues.