USER’S MANUAL Multi-function Blender EP24954US THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Please give us a chance to make it right and do better！ Contact our friendly customer service department for help first.
Contact Us! Do NOT return this item. Contact our friendly customer service department for help first. E-mail US: cs.us@costway.com UK: cs.uk@costway.com To customer Thank you for purchasing our company’s heating multi-function blender , To make sure you can use this product properly and keep it well maintained, please read carefully and save well these instructions, hope it is helpful for you.
Safety operation psti tips Below items are built based on appliance under safe and normal running to avoid an incident and unnecessary loss. Expect appliance user follow these instructions strictly. According to incident of injury severity and emergency level, Safety guards tips are divided into the following types: Safety operation tips Do not strain, pull or use the power cord in any other bad manner. Avoid fire caused by electric shock or electric arc.
Safety operation tips Switch off the appliance power immediately if you notice abnormal sound, peculiar smell, overheating, smoke, etc. when using the device. Please send appliance to warranty service center to repair. Unplug from outlet when not in use. Avoid electric shock, current leakage. Technical parameter Model BL3398 Rated voltage 120V～ Rated power Blender 1200w Heating 800w Rated frequency 60Hz Avoid electric shock, current leakage, fire happening.
Part name and accessory Product character and assembly Part name and accessory Product character and assembly Part name Product character and assembly Small measuring cup Can be used as a measuring cup. Insert the measuring cup to center hole of jar lid, rotated it clockwise till tightened; can open the cup lid and add in other food when blender is working. Jar lid 9.研磨杯盖密封圈（1个） Product Accessories: 1. Small measuring cup 2. Jar lid 3. Jar lid seal ring 4. Soup jar assembly 5.
Operation Instruction power source) Operation Instruction(Ⅰ. (Ⅰ.Connect Connecttoto power source) Operation Instruction (Ⅱ. Interface operation instruction) 1.Put ingredients into jar as food recipes show. Interface operation includes Three function area: 1. Digital LED display area 2. Indicator display area 3. Touch-key function option DIY setup and power START/CANCEL area. 3.Rotate jar lid assembly as clockwise into jar and make sure that the lid handle is aligned with the center of the jar handle.
1.Press “PRE-SET”,“TIME” flash. Others display off. 2.First press “HEAT/WARM”“ TEMP” flash, 2nd press NA OFF ② “HEAT/WARM", "Time” flash. 3. If no any operation on “HEAT/WARM” “Timer”. all LEDs off at this area. 1.
Ⅱ(C):interface operation list(when used as a grinder jar) # Touc Display status before habl power ON Display e(N type (when used as a A or grinder jar) Yes) Digital LED cool ① NA white display LED cool white ② NA backlight display Display “1：30” Display status after power ON (when used as a grinder jar) Display as time count down. 1.Press “TIME/SPEED”,“Time”flash. others light off. 2.If not press “TIME/SPEED”, all of light off. OFF 1.
Care and maintenance Troubleshooting 1.Switch off power and unplug cord from power outlet before clean. Failure type 2.Clean appliance in Time after use. 5.Jar lid and small measuring cup: separate it as two parts, clean by warm dish soap water and rinse it with clean water and dry thoroughly. Solution 1.Bottom trigger rod does not contact safety switch of base or safety switch damaged. 3.Do not immerse appliance or wash in water or any other liquid.
Welcome to visit our website and purchase our quality products! With your inspiring rating, COSTWAY will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE! US office: Fontana, California UK office: Ipswich Reward Points Exclusive Customer Service Personalized Recommendations Permanent Shopping Cart Order History We would like to extend our heartfelt thanks to all of our customers for taking time to assemble this product and giving us valuable feedbacks.
