Instructions / Assembly

Operation Instruction (Ⅰ. Connect to power source)
Operation Instruction (Ⅱ. Interface operation instruction)
10 11
Operation Instruction (Ⅰ. Connect to power source)
1.Put ingredients into
jar as food recipes
show.
2.Rotate measuring
cap clockwise into jar
lid.
3.Rotate jar lid
assembly as
clockwise into
jar and make
sure that the
lid handle is
aligned with the
center of the jar
handle.
5.Place whole jar assembly
which filled with ingredients
on the base vertically.
6.Plug power cord into
outlet(120V,60Hz).
Interface operation includes
Three function area:
1. Digital LED display area
2. Indicator display area
3. Touch-key function option
DIY setup and power
START/CANCEL area.
Ⅱ
(A) .Interface operation instruction( Used as a hot jar )
#
Display
type
Touch
able
(NA
or Yes)
Display
status
before
power ON
(when used
as a hot jar)
Display status after power ON
(when used as a hot jar)
①
Digital
LED
cool
white
display
NA
Display
“
--
:--”
1.Processing as certain function option ,display as
scroller of rectangle digital frame. when measured the
liquid Temperature reach to boiled, display
as count
down.
2.Processing as “PRE SET ”option, display as timing
count down.
3.Processsing as “HEAT/WARM” option ,display as
scroller, when reach to target Temperature set, display
the liquid actual Temperature directly .