Instructions / Assembly

Safeguards tips
14 15
• The heating plate of the appliance is equipped with a thermostat, if overheated,
the appliance will stop working until it cools down. If you want to restart appliance
or add brewing Time, you need to unplug power cord and cool down the appliance
to ambient Temperature.
• Although appliance with some protection device. heating without any food or
liquid is still not allowed.
• Do not touch hot soup jar when appliance is processing, avoid heat injury by
hi-Temp of jar and jar base.
• When use hot soup jar, make sure the jar lid closed well and check air outlet
whether is clean.
• Follow the jar limited volume(not exceed marked max line) for food processing,
especially the use of hot soup jar assembly, the liquid volume should not exceed
1.4L, and the brewed soybean milk should not exceed 1L.
• Appliance blades are sharp, be careful when cleaning.
Ⅱ
(C):interface operation list( when used as a grinder jar)
#
Display
type
Touc
habl
e(N
A or
Yes)
Display status before
power ON
(when used as a
grinder jar)
Display status after power ON
(when used as a grinder jar)
①
Digital
LED cool
white
display
NA
Display
“
1
：
30” Display as time count down.
②
LED cool
white
backlight
display
NA
OFF
1.Press “TIME/SPEED”,
“
Time
”
flash.
others light off.
2.If not press “TIME/SPEED”,
all of light
off.
③
LED cool
white
backlight
display
(START/
CANCEL
Red
backlight
display)
Yes
Default “GRIND"and
“
START/CANCEL
”
flash, other function
keys light off and not
available.
1.Interface under default condition: make
example of “GRIND” flash, if not
touch
“
TIME/SPEED
”
,only
“
START/
CANCEL
”
flash ,others function option
light off and not available.
touch
“
START/CANCEL
”
, appliance
processing as the
top gear H speed, and
count down as 1:30 till to end.
2.Interface under default condition: make
example of “GRIND” flash,
touch
“
TIME/SPEED
”
,and then
“START/CANCEL
” “
TIME/SPEED
”
,
“◀ ” “ ▶ ”
flash, others function
option light off and not available;
touch
“◀ ”“▶ ”
adjust processing
time ,max adjust 1:30 min, Time increase
or reduce by 5s per time, when time set
done and then touch
“START/CANCEL
”
,appliance
will
work as the top gear speed and count
down till to end.
Remark: 1.When appliance is processing,
but you want to return to standby
condition, touch "START/CANCEL ” to
go back. 2.The food'weight in grinder
shouldn't over 100g.