www.costway.
www.costway.com www.costway.
www.costway.com www.costway.com PRODUCT ASSEMBLY Board Iden�fica�on STEP 1 Not actual size 1 × 4 3 SCREW × 4 5 SCREW NUT × 1 WRENCH A 1 3 1 3 5 C B 4 3 1 3 1 1 C B C B 3 C B The side without holes of the 2 C plates is the front side, so it needs to rotate 180 degrees after full assembly.
www.costway.com PRODUCT ASSEMBLY PRODUCT ASSEMBLY STEP 2 2 www.costway.com Maximum Loads × 2 4 SCREW × 2 5 SPACER × 1 WRENCH 21LBS 4 2 A 2 2 5 C This item is only suitable within the specified maximum load-bearing. Heavier loads than the indicated load capacity may cause instability, resulting in possible injuries.
www.costway.com Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish. www.costway.
