USER'S MANUAL Console Table HW64005
PRODUCT ASSEMBLY Hardware List A B C D E 6*35mm 48 pcs 48 pcs 15*10mm 8*30mm 3*12mm 3*14mm F G 4*30mm 4*35mm 8 pcs K 4 pcs L 40 pcs H 2 pcs M 34 pcs I 2 pcs N 4 pcs J 4 pcs 4*16mm 4 pcs 4 pcs 2 sets 300mm 16 pcs 2.
PRODUCT ASSEMBLY Part List Assembly Overview 1 2 6 4 17 5 11 3 10 8 10 10 9 15 13 16 14 12 2/10 X2 7
PRODUCT ASSEMBLY A Step 1 48 pcs A A 1 X3 10 A A 11 12 X2 2 A A 3 1) Lay Top Panel (1), Connect Bar (10), Middle Back Connect Bar (11), Drawer Front Panel (12), Left panel (2) and Right Panel (3) as shown on a flat and soft surface that does not scratch the parts. 2) Screw Cam-bolt (A) into the designated holes on each .
PRODUCT ASSEMBLY F Step 2 8 pcs Step 3 B 8 pcs L 2 pcs M 2 pcs F 13 B 13 15 M 14 L 15 16 14 X2 12 X2 Attach Drawer Side Panel (13 & 14) to Drawer Back Panel (15) by using Screw (F). 1) Insert Drawer Back Panel (16) as per the groove on (13, 14 & 15). 2) Attach Drawer Front Panel (12) to (13 & 14) via Cam-bolt on (12). 3) Insert Cam-lock (B) to the designated holes on (13 & 14) then turn clock-wise to lock onto Cam-bolt.
PRODUCT ASSEMBLY Step 5 D D 10 pcs I 2 pcs K 4 pcs I 7 6 D K Attach Hinge (K) and Magnetic Bar (I) to Door (6 & 7) by using Screw (D) as shown. Step 6 D 8 pcs N1 2 sets D Back side with two holes for magnetic catch N1 5 4 Back side with two holes for magnetic catch Attach Drawer Glide (N1) to Left and Right Divide Panel (4 & 5) by using Screw (D).
PRODUCT ASSEMBLY Step 7 B 8 pcs C 6 pcs 9 B C 10 10 1) Attach Connect Bar (10) to Bottom Shelf (9) via Wood Dowel (C) and Cam-bolt on (10). 2) Insert Cam-lock (B) to the designated holes on (9) then turn clock-wise to lock onto Cam-bolt. Step 8 B 8 pcs C 6 pcs 8 B C 11 10 1) Attach Connect Bar (10 & 11) to Middle Shelf (8) via Wood Dowel (C) and Cam-bolt on (10 & 11). 2) Insert Cam-lock (B) to the designated holes on (8) then turn clock-wise to lock onto Cam-bolt.
PRODUCT ASSEMBLY Step 9 B 4 pcs C 4 pcs 2 C B 8 10 11 1) Attach (8, 10 & 11) to Left Panel (2) via Wood Dowel (C) and Cam-bolt on (2). 2) Insert Cam-lock (B) to the designated holes on (8, 10 & 11) then turn clock-wise to lock onto Cam-bolt. Step 10 B 4 pcs C 4 pcs C B 9 10 10 1) Attach (9 & 10 ) to Left Panel (2) via Wood Dowel (C) and Cam-bolt on (2). 2) Insert Cam-lock (B) to the designated holes on (9 &10) then turn clock-wise to lock onto Cam-bolt.
PRODUCT ASSEMBLY Step 11 8 B 8 pcs C 8 pcs 10 10 9 11 10 3 1) Attach Right Panel (3) to (8, 9, 10 & 11) via Wood Dowel (C) and Cam-bolt on (2). 2) Insert Cam-lock (B) to the designated holes on (8, 9 10 &11) then turn clock-wise to lock onto Cam-bolt. Step 12 C 4 pcs G 4 pcs 4 5 8 C G Attach Left and Right Divide Panel (4 & 5) to Middle Shelf (8) by using Wood Dowel (C) and Screw (G).
PRODUCT ASSEMBLY Step 13 B 8 pcs C 8 pcs J 16 pcs 1 C B 2 4 5 3 1) Attach Top Panel (1) to (2, 3, 4 & 5) via Wood Dowel (C) and Cam-bolt on (1). 2) Insert Cam-lock (B) to the designated holes on (2, 3 4 & 5) then turn clock-wise to lock onto Cam-bolt. Step 14 J 17 Attach Back Panel (17) with Screw (J).
PRODUCT ASSEMBLY Step 15 M L 6 D 4 5 D 7 H E 1) Attach Magnetic Catch (H) to Divide Panel (4 & 5) with Screw (E). 2) Attach Door (6 & 7) to Side Panel with Screw (D). 3) Attach Knob (M) to Door (6 & 7) with Knob Bolt (L). Step 16 N1 N2 Insert Drawers.
UNITED KINGDOM CANADA RUSSIA GERMANY FRANCE ITALY UNITED STATES SPAIN JAPAN AUSTRALIA TIPS： Your suggestions and comments for Costway are really important to us! We sincerely solicit you to go back to our shop and leave a good rating in just a simple click. It would be quite encouraging if you could kindly do so like below: Great products so far February 24, 2018 Great product so far. Fast delivery, easy setup, and working without any issues.
