Data Sheet

Installation Instruction:
FAN
FAN
Air flow
More than 50mmMore than 50mm
(a) (b)
1. Mounting Directions
1-1 Recommended standard mounting methods:
2. Mounting Method
2-1 There are ventilating holes on the front and back side panels,
do not obstruct; allow 50mm at least for air flow.
2-2 The Maximum allowable penetration of screw is 4mm.
Incomplete threading should not be penetrated.
2-3 Recommended the torque of mounting screw:
M4 screw: 1.27N • m (13.0kgf • cm)
650W Single Output Power Supply
AK-650 series
REV. E6
16/12/20
6
3-M4
L=3.0[0.12] max.
3-M4
L=3.0[0.12] max.
3-M4
L=3.0[0.12] max.
Recommended screw length is measured from the power supply surface