Installation Guide

22
Notice!
Before drilling any holes, make sure that no electrical
cables or other parts of the vehicle can be damaged by
drilling, sawing and filing.
For installation and mounting you will need the following tools:
y Pen for marking
y Drill bit set
y Drill
y Screwdriver
To secure the charger in place you will need:
y Machine bolts (M4) with washers and self-locking nuts or
y Self-tapping screws or wood screws
Fasten the charger as follow:
y Hold the charger against the installation location
y Mark the fastening points
y Fasten the charger with one screw through each hole in the
holders