Manualshelf

SC Series User Manual

ManualsBrandsCOTEK ManualsWind and Solar EnergyCOTEK SC-2000-112 2000 Watt 12 Volt Pure Sine Wave Inverter Charger
12345678910
5
EN
Electrical
Specification
Model No.
Item
SC-1200-112
SC-1200-124
SC-1200-212
SC-1200-224
AC Input*
30 A MAX
16 A MAX
Power Factor
Correction(PFC)
>0.95 (Max.)
Auxiliary DC
Output
Output Voltage
Battery Voltage
Output Current
20A Max
DC Output
Characteristics
Charging Current
Range
12.5 / 25 / 37.5 /
50A
6.25 / 12.5 /
18.75 / 25A
12.5 / 25 / 37.5 /
50A
6.25 / 12.5 /
18.75 / 25A
Max. Output
Voltage
14.4 VDC
@ GEL TYPE
28.8 VDC
@ GEL TYPE
14.4 VDC
@ GEL TYPE
28.8 VDC
@ GEL TYPE
Battery
Temperature
Compensation
-25 mV per ℃
-50 mV per ℃
-25 mV per ℃
-50 mV per ℃
Battery Control
(3-stage Battery
Chargers)
Bulk / Absorption / Float
Signal and
Control
Remote Control
Panel (Optional)
CR-20C / CR-16B / CR-8
Remote Control
Terminal
Controls the inverter ON / OFF operation
Dry Contact
Terminal
By a relay
Bypass Relay
Relay Specification
30 Amp / 250 VAC
Transfer Time
0 sec
Operating Temperature
Range
Full Load
-20 ℃ ~ 50 ℃*
Power de-rating
40 W / ℃, 51~60 ℃
Storage
-30 ℃~70 ℃
Operating Humidity
Range
Max 93%, Non-condensing
Cooling
Temperature & Load Controlled Cooling Fan
Power Sharing Function
Inverter mode / Charger mode / Power sharing
Power Generator / Power support
Mechanical Specification
Dimension
(W x H x D)
251 x 116 x 386mm
Net Weight
4.55Kg
Safety and EMS
Safety Standards
UL458 & Supplement SA / UL1741
EN 62368-1
E-mark
---
Certified CISPR 25; ISO7637-2
EMC Standards
Certified FCC Class A*
EN55032 Class A*,
EN55024 Class A*
EN61000-3-2, 3-3
EN61000-4-2, 3, 4, 5, 6, 8, 11
Table 2. SC-Series Specification.
Note ：
1. Max Inverter output define inverter 100% load output at Vac =100V / 200V
2. Max AC output define AC input current + Inverter output current, cannot over AC input limit.
3. Max AC input current Limit by the Breaker
4. SC series is a class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
5. For SC-1200 -112 and -124, the operating temperature range certified by UL Safety Standard is -20°C ~ 40°C.