SC Series User Manual

3. Installation and Maintenance

During installation and commissioning of the unit, the Safety Guidelines & Measures are applicable at all

times. See chapter 1 of this manual.

3-1. Unpacking the product

In addition to the unit the delivery includes：

 Battery temperature sensor TS-01 ( optional )

 Remote Control CR-20C ( optional or combo pack only )

 Quick Instruction Guide

After unpacking, check the contents for possible damage. Do not use the product if it is damaged. In

case of the contents damaged, please contact your supplier.

Check from the identification label whether the battery voltage is the same as the DC-input voltage of the

unit (e.g. 12V battery set for a 12V input voltage). Also check that the AC output voltage and output

power of the unit satisfies loading requirements.

3-2. Front Panel

Fig. 4

：

SC series front panel introduction

Front panel

AC Output

Two 3/4 inch knockouts provided with cable-clamp strain reliefs to allow and hold the AC

input and output field wiring.

Front panel

AC Output terminal (L/N)

AC Input terminal (L/N)

AC Input / Output ground terminal

AC Input