Installation Guide

1-2. Other Safety Notes

z Upon receipt, examine the carton box for damage. If you have

found any damage on the carton box please notify the company

you purchased this unit from.

z Do not operate near water or in excessive humidity.

z Do not open or disassemble the inverter, and warranty may be

voided.

z The DC side connections should be firm and tight.

z Grounding: Reliable grounding should be maintained.

z Do not drop a metal tool on the battery. The resulting spark or

short-circuit on the battery or on the other electrical part may

cause an explosion.

z Install the inverter in a well-ventilated area. Do not block the front

air vents, or the rear air exhausts of the unit.

z Wiring: Adequate input power must be supplied to the inverter for

proper use; correct wiring sizes must be ensured.

z Mount the inverter such that the fan axis is horizontal.

z Do not operate the inverter close to combustible gas or open fire.

z Do not operate appliances that may feed power back into the

inverter.

z Temperature: The inverter should be operated in an ambient

temperature range of -20

to 40 otherwise the output

efficiency may be affected. Air flow to the inverter must not be

blocked.