Specifications Sheet

MODEL
SP-1000-112 SP-1000-124 SP-1000-148 SP-1000-212 SP-1000-224 SP-1000-248
100 / 110 / 115 / 120VAC 200 / 220 / 230 / 240VAC
±5%
Pure sine wave output
Power ON / OFF remote control (Green Terminal)
Remote controller CR-8 / CR-16A (optional)
Input & Output fully isolation
Temperature & Load controlled cooling fan
Built in advance microprocessor to provide friendly interface
REV. A4
1
15/12/24
AC Voltage
AC Regulation
1000W Pure Sine Wave Inverter
SP-1000 series
<1750VA
>1000VA~1150VA (100%~115%)
11.0 VDC±0.3
12VDC
24VDC 48VDC 12VDC 24VDC
10.5 ~ 16.5VDC 21.0 ~ 33.0VDC 42.0 ~ 66.0VDC 10.5 ~ 16.5VDC 21.0 ~ 33.0VDC
≤1.5A@12VDC
≤0.8A@24VDC
≤0.5A@48VDC ≤1.5A@12VDC
≤0.8A@24VDC
<0.1A@12VDC <0.06A@24VDC <0.05A@48VDC <0.1A@12VDC <0.05A@24VDC
92%
93% 93%
92%
94%
Input Under - Voltage Protection
10.5
±0.3VDC 21.0 ±0.5VDC
22.0 ±0.5VDC
42.0 VDC±1.0
44.0 VDC±1.0
10.5 VDC±0.3
11.0 VDC±0.3
21.0 VDC±0.5
22.0 VDC±0.5
Output
Maximum Output Power (1 Min)
Output Waveform
Frequency
DC Voltage
Voltage Range
Input
NO Load Current
Power Saving Mode
Efficiency (Max.)
Input Under - Voltage Alarm
Protection
Input Under - Voltage Recovery
Input Over - Voltage Protection
Input Over - Voltage Recovery
Environment
Operating Temp.
Storage Temp.
Storage Temp. Humidity&
Output Overload
Output Short
Safety & EMC
Safety Standards
-20 ~ +40°C°C
-30°C ~ +70°C
Shutdown output voltage, restart to recover
10 ~ 95% RH
Certified UL 458
Certified EN 60950-1
Others
Cooling
Packing
Application
Dimension (W xHxD)
3.26kg; 4pcs / 14kg / 2.65CUFT
Home and office appliances, portable power equipment, vehicle, yacht and off-grid Solar power
systems ...etc.
200x83x372 mm / 7.87x3.27x14.65 inch
48VDC
42.0 ~ 66.0VDC
≤0.4A@48VDC
<0.05A@48VDC
94%
42.0 VDC
±1.0
44.0 VDC±1.0
EMC Standards
E-mark
Certified FCC class B
----
Certified EN 55022 class B; EN 55024
EN 61000-3-2, -3-3
EN 61000-4-2, 3, 4, 5, 6, 8, 11
Certified CISPR 25
ISO 7637-2
Features:
1000VA
Surge Power ( 1 Sec )
Output frequency 50 / 60 Hz selectable by DIP switch
Output voltage DIP switch selectable
Adjustable power saving mode by variable resister
3-color LED status indicators
Input protection: Reverse Polarity (Fuse) / Under Voltage / Over Voltage
Output protection: Short Circuit / Overload / Over Temperature
E13 / UL / CE / FCC approved
±3%
Rated Power
50 / 60 Hz ±0.5%
Over Temperature
Heat sink temperature over 80°C °C, shutdown output voltage, recover
automatically after heat sink temperature goes down to 60°C °C
±5
±5
DC Input Reverse Polarity
By fuse
12.5 VDC±0.3 25.0 ±0.5VDC 50.0 VDC±1.0 12.5 VDC±0.3 25.0 VDC±0.5 50.0 VDC±1.0
16.5 VDC±0.3 33.0 ±0.5VDC 66.0 VDC±1.0 16.5 VDC±0.3 33.0 VDC±0.5 66.0 VDC±1.0
14.5 VDC±0.3 29.0 ±0.5VDC 58.0 VDC±1.0 14.5 VDC±0.3 29.0 VDC±0.5 58.0 VDC±1.0
Shutdown output voltage, restart to recover
NOTE3
----
Control
&
Signal
Accessory (Optional)
Remote Control: CR-8 / CR-16A; Transfer Switch: TR-40
LED Indicator
Dry Contact Terminal
Remote Control Terminal
Input voltage level, output load level and faulty status
By relay
6-port green terminal
North America
(GFCI)
Socket Type
Note1 - Normal Condition: Vin=12.5V / 25V / 50V Vo=100 / 110 / 115 / 120 VAC 80% Full load (PF=1.0)
Note2 - Normal Condition: Vin=12.5V / 25V / 50V Vo=200 / 220 / 230 / 240 VAC 80% Full load (PF=1.0)
Note3 - UL only for GFCI receptacles
North America
(NEMA 5-15R)
Temperature & load controlled cooling fan
Pure Sine Wave (THD<5%@Normal Load )
NOTE1 Pure Sine Wave (THD<3%@Normal Load )NOTE2
Australia /
New Zealand
United
Kingdom
UniversalContinental
European
(SCHUKO)
France
Connector