SP1000 Manual

20
LED status Status Recovery point
Orange
Device startup
process abnormal
—
Orange Fast
Blink
Under Temperature
Protection
(Heat sink temp.
under -20 )
>0
Orange Slow
Blink
Over Temperature
Protection
(Heat sink temp.
over 80 )
<60
(heat sink temperature)
Table 17. Inverter LED Status Indicator
3-1-3. Function Switch Introduction
Figure 10. DIP switch ON/OFF position
3-1-3-1. Function Switch Definition
Dip Switch Function
S1 Voltage select
S2 Voltage select
S3 Frequency Select
S4 Power saving ON/OFF
Table 18. Function Switch Definition
3-1-3-2. Output voltage selection (S1&S2)
Output voltage S1 S2
100V/200V OFF OFF
110V/220V ON OFF
115V/230V OFF ON
120V/240V ON ON
Table 19. Function Switch definition: output voltage selection
Note! 100V series can be selected between
100/110/115/120VAC, and 200V series can be selected
between 200/220/230/240VAC.