Installation Manual

10
3-1-2. Remote control and Dry contact terminal ③④
Remote Control Terminal ③
1. Before installing the inverter, ensure that the main switch “OFF”.
2. Before using the remote function, ensure that the main switch pressed
toward “REMOTE”.
3. Ensure that the remote contacts are off.
4. Use 20 ~ 24 #AWG wire to connect the remote control terminals.
5. Remote control ON/OFF inverter setup status
INLINE FUSE
B
A
T
TE
R
Y
Normally Open
RELAY
COM.
NO
NC
ENB ENB
GND
Remote Control Terminal Dry Contact Terminal
Common
Normally Closed
GOUND
ENABLE -
ENABLE +
POSITIVE +
NEGATIVE -