Installation Manual
14
3-2. Front Panel
No. Description No. Description No. Description
A
Main Switch
C
LCD Display
E
Fan Ventilator
B
LED Indicators
D
LCD Display Selection Buttons
3-2-1. Main Switch
A
These are the 3-stage rocker switches for turning on, turning
off and remote mode.
3-2-2. LED Indicators
B
See details in Section 5-1.
3-2-3. LCD Display Selection Buttons
D
Data pertaining to the DC input voltage, AC output voltage, AC output
frequency, AC output current, etc. and system status can be shown
sequentially on the LCD display by pressing these buttons. Please refer to
chapter 5 for more information.
3-2-4. FAN Ventilation
E
The fans behind the ventilation grilles provides cooling.
DOT NOT obstruct these vents!
3-3. Maintenance
3-3-1. Make sure that the fan vents are not blocked.
3-3-2. Use a vacuum cleaner to remove any dust from the fan area.
3-3-3. When cleaning the case or front panel, use a soft, dry cloth, only. If the case
or front panel is very dirty, use a neutral, non-abrasive detergent. Do not use
alcohol or ammonia based solutions.
3-3-4. Regular service, and relocation of the inverter, should be performed by a
qua
lified service technician.
3-3-5. Avoid spilling liquid on the inverter.
A B
C D
E