Installation Manual

16
5. Front LCD Panel – Display & Setup
5-1. LCD Panel Indications
5-1-1. Set the Power Switch to the “ON” position. THE, inverter starts working
normally. The inverter will be operating in normal condition when either of the
following messages are displayed on the LCD screen
5-1-2. LED Indications
AC GRID Displays AC input status.
AC Input LED Status
AC input and DC-AC Inverter Output are Synchronous Green
egnarONO tupni CA
ffOFFO tupni CA
Note Synchronous means that the grid AC input frequency and DC-AC inverter
output frequency or phase are the same (See details in Section 5-3-3).
INVERTER Displays DC-AC inverter status.
DC-AC Inverter LED Status
Power OK Green
Power Not Good Red
BYPASS Displays Bypass relay status.
Bypass LED Status AC Output (Load)
From DC-AC inverter
(On-line Mode)
Orange AC Input
Off DC-AC Inverter
From AC input bypass
(Off-line Mode)
Green AC Input
Off DC-AC Inverter
ALARM Displays status of the Failure Alarm.
Alarm LED Status
egnarOmralA NAF/mralA rednU/revO
Set alarm in the inverter to operate normally off
Note For instructions on setting the alarm, see details in Section 5-3.
FQ=60.0 Io =8.5
Vi =24.0 Vo=115
LED
INDICATORS
LCD
DISPLAY
LCD DISPLAY
SELECTION BUTTONS