Specification

9
To replace the door latch
1. Remove the right latch hook located in the right bottom of the door and the sleeve in the Top of the
door.
2. Install the left latch hook ( in the accessory bag ) on the bottom right and insert the sleeve to the
top right. use the cap to cover the open holes. Please keep the right latch hook&block for later use.
To reposition the door handle
1. Remove the two buttons from the front of the door.
2. Pull off the door gusket on the back side of the door and uncrew the two bolts to release the door
handle.
3. Install the door handle on the oppsite side of the door, tighten the two screw firmly.
4. Insert the door gustket to the slot and use two new buttons to cover the previous mounting hole.
To replace the door on hinges:
1. Using a flathead screwdriver, remove the plug buttons from the screw holes opposite the door
hinges, top and bottom. Set aside.
2. Replace the axis on the Hinge 1 and tighten it firmly. Remove Hinge 1 and install it with left latch
block ( in accessory bag ) on the opposite bottom side.
3. Remove Hinge 2 and take down the right latch block, place Hinge 2 on the opposite top side.
Separate the axis from Hinge 2 and set it aside.
4. Install and align the door on Bottom Hinge 1 and replace axis on Hinge 2. Tighten it firmly.