Specification

14
Cleaning and Maintenance
Cleaning the Outside
Unplug your Refrigerator. Clean the outside with a cloth dampened in mild soapy water. Dry
thoroughly with a soft cloth. Polish with a stainless steel cleaner. To clean the door gasket, use only
mild soapy water. Never use harsh cleansers or scouring pads to clean any part of your unit.
Cleaning the Inside
Unplug your Refrigerator and remove its contents. Rinse the inside surfaces with plain water and dry
the chrome racks, basket and shelving. Avoid getting excess water inside the machine since it will
flow into the water trap near the compressor and possibly overflow.
Defrosting the Unit
The unit uses an automatic defrost system in which the refrigerated surfaces of the unit defrost
automatically. Defrost water drains into a hole in the floor of the storage compartment and is
channeled into a drain pan located at the back of the unit near the compressor. Heat transferred from
the compressor evaporates any water that has collected in the pan. Be sure the drain hole in the floor
of the unit is clear and unobstructed.
Extended Non-Use
VACATION/HOLIDAY, PROLONGED SHUTDOWN
The following steps are recommended for periods of extended non-use:
1. Remove all customable content from the unit.
2. Disconnect the power cord from its outlet/socket and leave it disconnected until the unit is
returned to service.
3. If ice is on the evaporator, allow ice to thaw naturally.
4. Clean and dry the interior of the unit. Ensure all water has been removed from the unit.
5. The door must remain open to prevent formation of mold and mildew. Open door a minimum of
2” (50 mm) to provide the necessary ventilation.
WINTERIZATION
If the unit will be exposed to temperatures of 40℉(4℃) or less, the steps above must be followed.