Specification

1
IMPORTANT SAFEGUARDS
Read all instructions before using this appliance. Use this appliance only for its intended purpose as
described in this instruction manual. Always exercise basic safety precautions, as described below.
After reading the instruction manual, store it in an accessible place where the user(s) of this product
can easily find it.
The purpose of these safety precautions is to ensure safe and correct use of the product to minimize
risks that could cause serious damage and injury to you or others. The safety precautions are divided
into WARNINGS and CAUTIONS. Cases where improper handling of the unit could lead to death
or serious injury are listed under the WARNING heading. However, the cases listed under
CAUTION could also lead to serious results. To ensure safety, adhere strictly to both types of safety
precautions.
1. All repairs, disassembly and modifications should be performed only by qualified technicians.
Attempting to perform these yourself could result in fire, malfunction or injury.
2. Never splash water directly onto the product or wash it with water without unplugging, as a short
circuit could result. In a rainy environment, a water-proof covering is recommended.
3. Never put flammable or volatile substances into the unit as explosion and fire could result.
4. Do not damage, modify, excessively bend, strain, twist or bundle the power cord. Avoid hot,
sharp, or aggressive surfaces. Also, placing heavy objects on the power cord or binding it could
damage the cord, possibly resulting in electrical shock or fire.
5. Use a dedicated wall outlet. Do not use an extension cord or multiple-outlet adaptor as this could
result in electrical shock, overheating and fire.
6. Never use flammable spray cans or leave flammable substances near the unit. Sparks from
electrical switches could result in explosion or fire. If a combustible gas is present near the
appliance, turn off the source of the gas, then open the windows and doors to allow the gas to
dissipate. To avoid an explosion, do not pull the plug or switch off the unit.
7. The electrical socket must have good grounding. The ground wire cannot be connected with a
gas pipe, heating pipe, water pipe, telephone line or lightning rod. It cannot be replaced with the
neutral wire of single-phase power. In addition to the ground wire, an electrical leakage circuit
breaker is also required.
8. Use an electrician installed ground fault circuit interrupter (GFCI) electrical outlet. If no GFCI is
installed, electrical shock could result.
9. Never climb onto the unit. The unit could tip over or fall and cause material damage or personal
injury.
10. Disconnect the power cord plug from the wall outlet before moving the unit and make sure that
the power cord is not damaged during transport. A damaged power cord could result in electrical
shock and/or fire.