Datasheet
processing - stencil/screen solder paste, then oven reow.
Due to board thickness, component density, and other
circumstances that dictate the required reow temperature,
Comus Technology uses a higher temperature solder for all
internal connections. We recommend that the temperature
(measured at the reed switch leads) does not exceed 260°C
for 1 minute. Temperature and time in excess of the rec-
ommended levels may result in damage to the reed switch.
Handling Force
When possible don’t add pressure on the glass on placing
the reed switch on a pcb or device. However when han-
dling with a Pick and Place machine the acceptable force
on the reed switch is 3N with a max of 5N.
• As part of the company policy of continued product improvement, specications
may change without notice. Our sales ofce will be pleased to help you with the
latest information on this product range and the details of our full design and
manufacturing service. All products are supplied to our standard conditions of
sale unless otherwise agreed in writing.
RI-07 SMD Series Dry Reed Switch
USA Tel: +(1)973 777 6900 / Fax: +(1) 973 777 8405 ▪ Belgium Tel: + 32 (0)12 390400
Page 3 of 4
Recommended Soldering Reow Prole
All Dimension in inches (mm) nominal
Dimensions for RI-07 SMD Tape and Reel
0.079 (2)
0.157 (4) Pitch
0.081 (2.05)
0.768 (19.5)
B-B
A-A
B
B
A A
0.012 (0.3)
1.118 (28.4)
0.559 (14.2)
0.071 (1.8)
1.260 (32)
0.157 (4) Pitch
Ø 0.059 (1.5)
* Each tape and reel contains 5,000 pieces.