User's Manual

ManualsBrandsCotton On USA ManualsAudio EquipmentHeadphone

Bluetooth Headphones

Instruction Manual

QKH6

SPECIFICATIONS

Bluetooth version: Bluetooth V2.1+EDR

Effective transmission range: 8-10m

Battery: 300mAh Li-polymer battery

Charging time: 2.5 hours (maximum)

Playing time: About 6 hours

Stand-by time: up to 30 days

LED indicator status:

Blue LED for power and BT pairing indicator

Red LED for charging indicator

Diameter of driver unit: 40mm

Frequency range: 20Hz~20kHz

Sensitivity at 1KHz 110+/-5 dB

Impedance: 32+/-15% 

Distortion: 1% at 1KHz

Rated power input 10mW

Net Weight: Approx. 160g

ACCESSORIES

Micro USB charging cable

3.5mm audio cable

Instruction Manual

Summary of content (5 pages)

PAGE 1
Bluetooth Headphones Instruction Manual QKH6 SPECIFICATIONS Bluetooth version: Bluetooth V2.1+EDR Effective transmission range: 8-10m Battery: 300mAh Li-polymer battery Charging time: 2.
PAGE 2
Important Safety Information Listen Responsibly To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level. Noise levels are measured in decibels (dB), exposure to any noise at or above 85 dB can cause gradual hearing loss. Monitor your use; hearing loss is a function of loudness versus time.
PAGE 3
6. Microphone 7. LED indicator PAIRING 1. Make sure your phone, computer or music device is turned on and within 1 meter of each other. 2. Hold down Multifunction On/Off button (1) for about 3 seconds until LED light starts to flash BLUE quickly. 3. Activate the Bluetooth feature on your phone or device and set it to search for Bluetooth devices (Discoverable). 4. Select ‘L6’ from the list of found devices. 5. If necessary, enter passcode ‘0000’ to pair and connect the headphones to your device. 6.
PAGE 4
How to Fold the headphone How to keep it in a bag( if there is ) Using headphones in Passive Mode (Wired) You can use the headphones as a wired headphone to save battery. Simply connect one end of the 3.5mm cable to the bottom of the ear cushion and the other end to your phone or device. Note: Inserting an audio cable disables wireless functionality.
PAGE 5
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.