Installation Guide

Straight Valance Ties to Rod
To install a Straight Valance with ties simply use
the coordinting valance ties (located at the top of
the valance) and tie your valance to your existing
curtain rod. Hang rod at desired height and tie
either bow tie or knot depending on your preferance
and style.
Straight Valance with Rod Pocket
All Cotton Tale Valances (Straight/Balloon) are Machine Washable
on Cold Gentle/Delicate Cycle & can be Tumbled Dried on Low Heat
To install a Straight Valance without ties use the
rod pocket (located at the top back of the valance)
and slide your existing curtain rod all the way
through the valances rod pocket. Hang rod at
desired height.
To install a Balloon Valance use the rod pocket
(located at the top back of the valance) and slide
your existing curtain rod all the way through
the valance rod pocket. Hang rod at desired height.
Balloon Valance with Rod Pocket
Valance Installation Guide & Use/Care Manual